All Products
Showing 241–255 of 375 results
-
All Products, Batteries, Energy Storage, SolaX Power
SolaX BMS Parallel Box G2 for Triple Power T30 Batteries
All Products, Batteries, Energy Storage, SolaX PowerSolaX BMS Parallel Box G2 for Triple Power T30 Batteries
The second generation SolaX BMS Parallel Box G2 for T30 is here; enabling you to double up on battery storage capacity when using the SolaX Triple Power 3.0kWh batteries.
Encompassing the very latest LFP technology ensures much safer installations with wider temperature tolerances. The parallel box helps to prolong battery life due to the alternate use of dual module.
Key Features of the SolaX BMS Parallel Box G2:
- Increase the capacity of your battery storage
- Dual-module in case
- Convenient capacity for expansion
- Prolong the batteries life due to the alternate use of dual-module
- Works with SolaX T30 3.0kWh Batteries
- Have T58 Batteries? Please see this product: SolaX BMS Parallel Box G2 for Triple Power T58 Batteries
Whats new on the G2 Parallel Box?
- Now works with SolaX T30 3.0kWh Batteries, enabling up to 8x of them to be connected to a single inverter.
How many batteries can I install with this product?
- Single Phase: Install either 2, 4, 6 or 8
- Three Phase: Install either 4, 6 or 8
PLEASE NOTE: A minimum of 2 batteries (single phase) and 4 batteries (three-phase) must be used with this product.
PLEASE NOTE: BMS module must be used – please refer to diagram in images or the user manual for details of setup and configuration/design.
Downloads
Datasheet – BMS Parallel Box G2
User Manual – BMS Parallel Box G2HAVE QUESTIONS ABOUT THIS PRODUCT OR LOOKING FOR ADVICE FOR A BATTERY STORAGE SYSTEM? CONTACT US!
SKU: BMS-PARALLEL-BOX-G2-T30 -
All Products, Batteries, Energy Storage, SolaX Power
SolaX BMS Parallel Box G2 for Triple Power T58 Batteries
All Products, Batteries, Energy Storage, SolaX PowerSolaX BMS Parallel Box G2 for Triple Power T58 Batteries
The second generation SolaX BMS Parallel Box G2 is here; enabling you to double up on battery storage capacity when using the SolaX Triple Power 5.8kWh batteries.
Encompassing the very latest LFP technology ensures much safer installations with wider temperature tolerances. The parallel box helps to prolong battery life due to the alternate use of dual module.
Key Features of the SolaX BMS Parallel Box G2:
- Increase the capacity of your battery storage
- Dual-module in case
- Convenient capacity for expansion
- Prolong the batteries life due to the alternate use of dual-module
- Works with SolaX T58 Batteries
- Have T30 Batteries? Please see this product: SolaX BMS Parallel Box G2 for Triple Power T30 Batteries
Whats new on the G2 Parallel Box?
- Now works with T58 5.8kWh MASTER batteries, meaning it is easier to retro-fit to existing systems.
How many batteries can I install with this product?
- Single Phase: Install either 2, 4 or 6
- Three Phase: Install either 4, 6 or 8
PLEASE NOTE: A minimum of 2 batteries (single phase) and 4 batteries (three-phase) must be used with this product.
PLEASE NOTE: BMS module must be used – please refer to diagram in images or the user manual for details of setup and configuration/design.
Downloads
Datasheet – BMS Parallel Box G2
User Manual – BMS Parallel Box G2HAVE QUESTIONS ABOUT THIS PRODUCT OR LOOKING FOR ADVICE FOR A BATTERY STORAGE SYSTEM? CONTACT US!
SKU: BMS-PARALLEL-BOX-G2 -
All Products, Batteries, Energy Storage, SolaX Power
SolaX BMS Parallel Box – for Triple Power 5.8 Battery
All Products, Batteries, Energy Storage, SolaX PowerSolaX BMS Parallel Box – for Triple Power 5.8 Battery
The SolaX BMS Parallel Box V2 (Version II) enables you to double up on battery storage capacity when using the Triple Power 5.8kWh batteries.
The BMS parallel box acts as a replacement for the Master battery. You cannot use a Master battery in your system if you have the parallel box installed. If retro-fitting the parallel box to an existing system then the existing Master battery becomes redundant.
Features of the SolaX BMS Parallel Box:
- Wide temperature tolerance
- Dual-module in case
- Convenient capacity for expansion
- Prolong the batteries life due to the alternate use of dual-module
Encompassing the very latest LFP technology ensures much safer installations with wider temperature tolerances. The parallel box helps to prolong battery life due to the alternate use of dual module.
How many batteries can I install with this product?
- Single Phase: Install either 2, 4 or 6 Triple Power 5.8kWh SLAVE batteries
- Three Phase: Install either 4, 6, 8 Triple Power 5.8kWh SLAVE batteries
PLEASE NOTE: A minimum of 2 batteries (single phase) and 4 batteries (three-phase) must be used with this product.
HAVE QUESTIONS ABOUT THIS PRODUCT OR LOOKING FOR ADVICE FOR A BATTERY STORAGE SYSTEM? CONTACT US!
SKU: BMS-PARALLEL-T58 -
All Products, Energy Storage, Hybrid Inverters, Single Phase, SolaX Power
SolaX X1 Hybrid 3.0kW G4 Inverter
All Products, Energy Storage, Hybrid Inverters, Single Phase, SolaX PowerSolaX X1 Hybrid 3.0kW G4 Inverter
The SolaX X1 Hybrid 3.0kW G4 is the 4th generation of the SolaX Hybrid range, retaining all the key features of the 3rd generation while making some welcome improvements.
The Gen4 has been designed and developed using the very latest solar technology. SolaX have pushed back the boundaries for what is possible when designing a storage inverter.
The ground-breaking SolaX X1 Hybrid 3.0kW G4 is an inverter that can also store surplus energy in batteries for later use. It is important to understand that this is a hybrid solar PV inverter and battery storage controller. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter.
- In-built EPS changeover switch
- Supports up to 150% PV oversizing and 110% overload output
- Can work at full capacity down to -35C
- 97.0% Charge/discharge efficiency
- On-grid and off-grid use
- 5 work modes, 2 charging periods available
- IP65 protection level
- CT compatible, loads respond within 0.3s
- 30 Minute Total Installation Time
- Includes WiFi Dongle
SKU: X1-G4-HYBRID-3.0 -
All Products, Energy Storage, Hybrid Inverters, Single Phase, SolaX Power
SolaX X1 Hybrid 3.7kW G4 Inverter
All Products, Energy Storage, Hybrid Inverters, Single Phase, SolaX PowerSolaX X1 Hybrid 3.7kW G4 Inverter
The SolaX X1 Hybrid 3.7kW G4 is the 4th generation of the SolaX Hybrid range, retaining all the key features of the 3rd generation while making some welcome improvements.
The Gen4 has been designed and developed using the very latest solar technology. SolaX have pushed back the boundaries for what is possible when designing a storage inverter.
The ground-breaking SolaX X1 Hybrid 3.7kW G4 is an inverter that can also store surplus energy in batteries for later use. It is important to understand that this is a hybrid solar PV inverter and battery storage controller. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter.
- In-built EPS changeover switch
- Supports up to 150% PV oversizing and 110% overload output
- Can work at full capacity down to -35C
- 97.0% Charge/discharge efficiency
- On-grid and off-grid use
- 5 work modes, 2 charging periods available
- IP65 protection level
- CT compatible, loads respond within 0.3s
- 30 Minute Total Installation Time
- Includes WiFi Dongle
Downloads
Datasheet – SolaX X1 Hybrid G4
Video
SKU: X1-G4-HYBRID-3.7 -
All Products, Energy Storage, Hybrid Inverters, Single Phase, SolaX Power
SolaX X1 Hybrid 5.0kW G4 Inverter
All Products, Energy Storage, Hybrid Inverters, Single Phase, SolaX PowerSolaX X1 Hybrid 5.0kW G4 Inverter
The SolaX X1 Hybrid 5.0kW G4 is the 4th generation of the SolaX Hybrid range, retaining all the key features of the 3rd generation while making some welcome improvements.
The Gen4 has been designed and developed using the very latest solar technology. SolaX have pushed back the boundaries for what is possible when designing a storage inverter.
The ground-breaking SolaX X1 Hybrid 5.0kW G4 is an inverter that can also store surplus energy in batteries for later use. It is important to understand that this is a hybrid solar PV inverter and battery storage controller. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter.
- In-built EPS changeover switch
- Supports up to 150% PV oversizing and 110% overload output
- Can work at full capacity down to -35C
- 97.0% Charge/discharge efficiency
- On-grid and off-grid use
- 5 work modes, 2 charging periods available
- IP65 protection level
- CT compatible, loads respond within 0.3s
- 30 Minute Total Installation Time
- Includes WiFi Dongle
SKU: X1-G4-HYBRID-5.0 -
All Products, Energy Storage, Hybrid Inverters, Single Phase, SolaX Power
SolaX X1 Hybrid 6.0kW G4 Inverter
All Products, Energy Storage, Hybrid Inverters, Single Phase, SolaX PowerSolaX X1 Hybrid 6.0kW G4 Inverter
The SolaX X1 Hybrid 6.0kW G4 is the 4th generation of the SolaX Hybrid range, retaining all the key features of the 3rd generation while making some welcome improvements.
The Gen4 has been designed and developed using the very latest solar technology. SolaX have pushed back the boundaries for what is possible when designing a storage inverter.
The ground-breaking SolaX X1 Hybrid 6.0kW G4 is an inverter that can also store surplus energy in batteries for later use. It is important to understand that this is a hybrid solar PV inverter and battery storage controller. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter.
- In-built EPS changeover switch
- Supports up to 150% PV oversizing and 110% overload output
- Can work at full capacity down to -35C
- 97.0% Charge/discharge efficiency
- On-grid and off-grid use
- 5 work modes, 2 charging periods available
- IP65 protection level
- CT compatible, loads respond within 0.3s
- 30 Minute Total Installation Time
- Includes WiFi Dongle
SKU: X1-G4-HYBRID-6.0 -
All Products, Energy Storage, Fox ESS, Hybrid Inverters, Three Phase
Fox H3 5.0kW Hybrid Inverter (Three Phase)
All Products, Energy Storage, Fox ESS, Hybrid Inverters, Three PhaseFox H3 5.0kW Hybrid Inverter (Three Phase)
The Fox H3 5.0kW Hybrid Inverter is a three-phase DC-AC Solar Inverter that can also store surplus energy in batteries for later use.
It is important to understand that this is a hybrid solar PV inverter and battery storage controller combined. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter.
Features of the Fox H3 5.0kw Hybrid Inverter:
- EPS (Emergency Power Supply) Capability
- Can work in parallel with up to 10x inverters
- Uses high voltage batteries
- Remote monitoring via web portal or smartphone
- Easy installation
- Several work modes available
- IP65 rated – suitable for outdoor installations
- Includes WiFi Dongle and Three Phase CT Clamp
Connect over 30kWh Battery Storage per inverter
This inverter is compatible with any Fox ESS High Voltage batteries including Energy Cube, MIRA (HV25) and HV2600 batteries. Depending on the configuration, you can achieve over 30kWh of battery storage capacity.
The inverter can be installed in parallel with up to 10x inverters and have a full battery stack connected to each inverter!
Install up to 10x Inverters in Parallel
If you need to support high power loads or a have large commercial installation, the Fox H3 Hybrid has you covered. You can install up to 10x inverters in parallel for up to 120kW.
Have a large scale/commercial project? Please contact us for advice and pricing!
Fox ESS Integrations
Earn extra from your Fox ESS batteryAxle Energy runs a free Virtual Power Plant (VPP) that works with Fox ESS batteries and inverters. It occasionally exports energy from your system to support the grid - and pays you for taking part.
- £25 signup bonus when you join via our link
- £10/month minimum earnings guaranteed
- £1 per kWh exported during events
Downloads
Fox H3 Hybrid – Datasheet
Battery Compatibility Sheet
Fox H3 Hybrid – User Manual
Fox H3 Hybrid – Installation GuideSKU: FE-H3-5.0 -
All Products, Energy Storage, Fox ESS, Hybrid Inverters, Three Phase
Fox H3 6.0kW Hybrid Inverter (Three Phase)
All Products, Energy Storage, Fox ESS, Hybrid Inverters, Three PhaseFox H3 6.0kW Hybrid Inverter (Three Phase)
The Fox H3 6.0kW Hybrid Inverter is a three-phase DC-AC Solar Inverter that can also store surplus energy in batteries for later use.
It is important to understand that this is a hybrid solar PV inverter and battery storage controller combined. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter.
Features of the Fox H3 6.0kw Hybrid Inverter:
- EPS (Emergency Power Supply) Capability
- Can work in parallel with up to 10x inverters
- Uses high voltage batteries
- Remote monitoring via web portal or smartphone
- Easy installation
- Several work modes available
- IP65 rated – suitable for outdoor installations
- Includes WiFi Dongle and Three Phase CT Clamp
Connect over 30kWh Battery Storage per inverter
This inverter is compatible with any Fox ESS High Voltage batteries including Energy Cube, MIRA (HV25) and HV2600 batteries. Depending on the configuration, you can achieve over 30kWh of battery storage capacity.
The inverter can be installed in parallel with up to 10x inverters and have a full battery stack connected to each inverter!
Install up to 10x Inverters in Parallel
If you need to support high power loads or a have large commercial installation, the Fox H3 Hybrid has you covered. You can install up to 10x inverters in parallel for up to 120kW.
Have a large scale/commercial project? Please contact us for advice and pricing!
Fox ESS Integrations
Earn extra from your Fox ESS batteryAxle Energy runs a free Virtual Power Plant (VPP) that works with Fox ESS batteries and inverters. It occasionally exports energy from your system to support the grid - and pays you for taking part.
- £25 signup bonus when you join via our link
- £10/month minimum earnings guaranteed
- £1 per kWh exported during events
Downloads
Fox H3 Hybrid – Datasheet
Battery Compatibility Sheet
Fox H3 Hybrid – User Manual
Fox H3 Hybrid – Installation GuideSKU: FE-H3-6.0 -
All Products, Energy Storage, Fox ESS, Hybrid Inverters, Three Phase
Fox H3 8.0kW Hybrid Inverter (Three Phase)
All Products, Energy Storage, Fox ESS, Hybrid Inverters, Three PhaseFox H3 8.0kW Hybrid Inverter (Three Phase)
The Fox H3 8.0kW Hybrid Inverter is a three-phase DC-AC Solar Inverter that can also store surplus energy in batteries for later use.
It is important to understand that this is a hybrid solar PV inverter and battery storage controller combined. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter.
Features of the Fox H3 8.0kw Hybrid Inverter:
- EPS (Emergency Power Supply) Capability
- Can work in parallel with up to 10x inverters
- Uses high voltage batteries
- Remote monitoring via web portal or smartphone
- Easy installation
- Several work modes available
- IP65 rated – suitable for outdoor installations
- Includes WiFi Dongle and Three Phase CT Clamp
Connect over 30kWh Battery Storage per inverter
This inverter is compatible with any Fox ESS High Voltage batteries including Energy Cube, MIRA (HV25) and HV2600 batteries. Depending on the configuration, you can achieve over 30kWh of battery storage capacity.
The inverter can be installed in parallel with up to 10x inverters and have a full battery stack connected to each inverter!
Install up to 10x Inverters in Parallel
If you need to support high power loads or a have large commercial installation, the Fox H3 Hybrid has you covered. You can install up to 10x inverters in parallel for up to 120kW.
Have a large scale/commercial project? Please contact us for advice and pricing!
Fox ESS Integrations
Earn extra from your Fox ESS batteryAxle Energy runs a free Virtual Power Plant (VPP) that works with Fox ESS batteries and inverters. It occasionally exports energy from your system to support the grid - and pays you for taking part.
- £25 signup bonus when you join via our link
- £10/month minimum earnings guaranteed
- £1 per kWh exported during events
Downloads
Fox H3 Hybrid – Datasheet
Battery Compatibility Sheet
Fox H3 Hybrid – User Manual
Fox H3 Hybrid – Installation GuideSKU: FE-H3-8.0 -
All Products, Energy Storage, Fox ESS, Hybrid Inverters, Three Phase
Fox H3 10.0kW Hybrid Inverter (Three Phase)
All Products, Energy Storage, Fox ESS, Hybrid Inverters, Three PhaseFox H3 10.0kW Hybrid Inverter (Three Phase)
The Fox H3 10.0kW Hybrid Inverter is a three-phase DC-AC Solar Inverter that can also store surplus energy in batteries for later use.
It is important to understand that this is a hybrid solar PV inverter and battery storage controller combined. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter.
Features of the Fox H3 10.0kw Hybrid Inverter:
- EPS (Emergency Power Supply) Capability
- Can work in parallel with up to 10x inverters
- Uses high voltage batteries
- Remote monitoring via web portal or smartphone
- Easy installation
- Several work modes available
- IP65 rated – suitable for outdoor installations
- Includes WiFi Dongle
Connect over 30kWh Battery Storage per inverter
This inverter is compatible with any Fox ESS High Voltage batteries including Energy Cube, MIRA (HV25) and HV2600 batteries. Depending on the configuration, you can achieve over 30kWh of battery storage capacity.
The inverter can be installed in parallel with up to 10x inverters and have a full battery stack connected to each inverter!
Install up to 10x Inverters in Parallel
If you need to support high power loads or a have large commercial installation, the Fox H3 Hybrid has you covered. You can install up to 10x inverters in parallel for up to 120kW.
Have a large scale/commercial project? Please contact us for advice and pricing!
Fox ESS Integrations
Earn extra from your Fox ESS batteryAxle Energy runs a free Virtual Power Plant (VPP) that works with Fox ESS batteries and inverters. It occasionally exports energy from your system to support the grid - and pays you for taking part.
- £25 signup bonus when you join via our link
- £10/month minimum earnings guaranteed
- £1 per kWh exported during events
Downloads
Fox H3 Hybrid – Datasheet
Battery Compatibility Sheet
Fox H3 Hybrid – User Manual
Fox H3 Hybrid – Installation GuideSKU: FE-H3-10.0 -
All Products, Alpha ESS, Batteries, Energy Storage
AlphaESS 5.7kWh Parallel Battery – Smile5 (IP65)
With its modular design, the ‘plug & play’ AlphaESS 5.7kWh Parallel Battery has been designed to be aesthetically pleasing when used with Smile5 Hybrid Inverter.
Warranty: As per the AlphaESS Warranty document “It is required that all systems have internet connection for monitoring. Systems that are not connected to the internet will have their warranty reduced to 3 years”
Battery Limits and Compatability
Up to 6 of these 5.7kWh batteries can be connected to the Smile5 Hybrid Inverter, giving a total battery storage capacity of 34.2kWh. Accounting for the 96% DoD, this is a usable capacity of 32.83kWh.
Have a large scale/commercial project? Please contact us for advice and pricing!
Features of the AlphaESS 5.7kWh Parallel Battery:
- Suitable for use both Indoors & Outdoors
- Safest LiFePO4 (LFP) Chemistry
- Long service life of 10,000 cycles backed by a 10 year warranty
- Plug & Play installation
- The batteries are modular and easy to expand
- Storage capacity of over 30+ kWh
- Intelligent control
- 24/7 Monitoring
Works with Smart Tariffs including Octopus Energy
When combined with a AlphaESS battery, the AlphaESS Smile5 5.0kW Hybrid Inverter has been designed to work seamlessly with smart energy tariffs. The first energy supplier to offer such a tariff is Octopus Energy, however the AlphaESS battery system works perfectly with any other energy provider.
Downloads
AlphaESS 5.7kWh Battery – Datasheet
AlphaESS 5.7kWh Battery – Installation ManualVideo – AlphaESS Smile5 Installation
SKU: SMILE5-BAT -
All Products, Alpha ESS, Batteries, Energy Storage
AlphaESS SMILE-G3 10.1kWh Battery for Alpha Smile G3 – SMILE-G3-BAT-10.1P
All Products, Alpha ESS, Batteries, Energy StorageAlphaESS SMILE-G3 10.1kWh Battery for Alpha Smile G3 – SMILE-G3-BAT-10.1P
The AlphaESS SMILE-G3 10.1kWh Battery battery is designed for use with the Smile G3 system, and up to six (6) of this battery can be installed in parallel to give a capacity of 60.6kWh. With its modular design, the ‘plug & play’ Battery has been designed to be aesthetically pleasing when used with the Smile G3 Hybrid Inverter.
Warranty: As per the AlphaESS Warranty document “It is required that all systems have internet connection for monitoring. Systems that are not connected to the internet will have their warranty reduced to 3 years”
Battery Limits and Compatability
Up to 6 of these 10.1kWh batteries can be connected to the Smile G3 Hybrid Inverter, giving a total battery storage capacity of 60.6kWh. Accounting for the 95% DoD, this is a usable capacity of 57.57kWh which gives this system lots of versatility.
Looking for help on your solar and battery storage journey? Please contact us for impartial advice.
Features of the AlphaESS SMILE-G3 10.1kWh Battery:
- Essential Load Protection
- Safest LiFePO4 (LFP) Chemistry
- Long service life of 8,000 cycles backed by a 10 year performance warranty
- Simple installation and maintenance
- The batteries are modular and easy to expand
- Storage Capacity – 60.6kWh
- High Depth of Discharge – 95%
- Intelligent control
- 24/7 Monitoring
- IP65 Rated
Why Invest in Solar Battery Storage?
More and more homeowners are going solar to reduce their electricity bills and protect the environment for future generations. A battery system allows you to go even further by storing surplus solar generation for use at any time, increasing your savings and reducing your reliance on the grid.
Downloads
Datasheet for the AlphaESS SMILE-G3 10.1kWh Battery
User Manual for the Alpha Smile G3
Warranty Document for AlphaESSSKU: SMILE-G3-BAT-10.1 -
All Products, Alpha ESS, Batteries, Energy Storage
AlphaESS SMILE-G3 3.8kWh Battery for Alpha Smile G3 – SMILE-G3-BAT-3.8S
All Products, Alpha ESS, Batteries, Energy StorageAlphaESS SMILE-G3 3.8kWh Battery for Alpha Smile G3 – SMILE-G3-BAT-3.8S
The AlphaESS SMILE-G3 3.8kWh Battery battery is designed for use with the Smile G3 system, and up to four of this battery can be used in series to give a capacity of 15.2kWh. With its modular design, the ‘plug & play’ Battery has been designed to be aesthetically pleasing when used with the Smile G3 Hybrid Inverter.
Warranty: As per the AlphaESS Warranty document “It is required that all systems have internet connection for monitoring. Systems that are not connected to the internet will have their warranty reduced to 3 years”
Battery Limits and Compatability
Up to 4 of these 3.8kWh batteries can be connected to the Smile G3 Hybrid Inverter, giving a total battery storage capacity of 15.2kWh. Accounting for the 95% DoD, this is a usable capacity of 14.44kWh which is plenty for the average UK home.
Looking for help on your solar and battery storage journey? Please contact us for impartial advice.
Features of the AlphaESS SMILE-G3 3.8kWh Battery:
- Essential Load Protection
- Safest LiFePO4 (LFP) Chemistry
- Long service life of 8,000 cycles backed by a 10 year performance warranty
- Simple installation and maintenance
- The batteries are modular and easy to expand
- Storage Capacity – 15.2kWh, plenty the average residential UK home
- High Depth of Discharge – 95%
- Intelligent control
- 24/7 Monitoring
Why Invest in Solar Battery Storage?
More and more homeowners are going solar to reduce their electricity bills and protect the environment for future generations. A battery system allows you to go even further by storing surplus solar generation for use at any time, increasing your savings and reducing your reliance on the grid.
Downloads
Datasheet for the AlphaESS SMILE-G3 3.8kWh Battery
User Manual for the Alpha Smile G3
Warranty Document for AlphaESSVideo – Introducing the AlphaESS Smile G3
SKU: SMILE-G3-BAT-3.8 -
All Products, Alpha ESS, Batteries, Energy Storage
AlphaESS SMILE-G3 4.8kWh Heated Battery Module – SMILE-G3-BAT-4.8S
All Products, Alpha ESS, Batteries, Energy StorageAlphaESS SMILE-G3 4.8kWh Heated Battery Module – SMILE-G3-BAT-4.8S
AlphaESS SMILE-G3 4.8kWh Heated Battery Module – high-voltage, IP65-rated LiFePO₄ storage with integrated heating for reliable performance even in low temperatures. Modular design allows up to six units (28.8kWh total) when paired with the Smile G3 Hybrid Inverter. Backed by a 10-year warranty and intelligent monitoring via the AlphaESS app.
Note: Requires a compatible AlphaESS Smile G3 inverter to operate.
Product Code: SMILE-G3-BAT-4.8S
Downloads & Documents
SKU: SMILE-G3-BAT-4.8
