Shop
Showing 1–15 of 409 results
-
All Products, Anker SOLIX, EV Charging
Anker SOLIX EV RFID Card
Simple and secure access control for your Anker SOLIX EV Charger with the official RFID Card. Designed for convenient tap-and-charge authentication, this card allows users to start charging instantly without requiring app setup.
Ideal for households with multiple drivers, the Anker SOLIX RFID Card supports multi-user access and can be paired with up to 10 RFID cards per charger.
Key Features
- Tap and Charge – authenticate instantly without app setup
- Multi-user access – supports up to 10 RFID cards per charger
- Durable Anker SOLIX design with protective coating against scratches, weather and wear
- 13.56MHz (HF) frequency
- 8-year data retention
SKU: ANK-EV-RFID -
All Products, Batteries, Cables, Installation Accessories, SolaX Power
SolaX Cables for Inverter to TP58 / TP30 Batteries (2m)
All Products, Batteries, Cables, Installation Accessories, SolaX PowerSolaX Cables for Inverter to TP58 / TP30 Batteries (2m)
Ensure a reliable connection between your SolaX hybrid inverter and SolaX Triple Power TP58 or TP30 battery system with this genuine SolaX battery-to-inverter cable. Designed specifically for SolaX high-voltage battery installations, this cable provides a secure and dependable connection for new installations or replacement projects.
Available in 2m and 5m lengths, allowing flexibility to suit a range of installation requirements. Positive and negative battery connectors and pins are not included and must be purchased separately if required.
SKU: SOLAX-TP58TP30-INV-CABLE-2M -
All Products, Batteries, Cables, Installation Accessories, SolaX Power
SolaX Cables for Inverter to TP58 / TP30 Batteries (5m)
All Products, Batteries, Cables, Installation Accessories, SolaX PowerSolaX Cables for Inverter to TP58 / TP30 Batteries (5m)
Ensure a reliable connection between your SolaX hybrid inverter and SolaX Triple Power TP58 or TP30 battery system with this genuine SolaX battery-to-inverter cable. Designed specifically for SolaX high-voltage battery installations, this cable provides a secure and dependable connection for new installations or replacement projects.
Available in 2m and 5m lengths, allowing flexibility to suit a range of installation requirements. Positive and negative battery connectors and pins are not included and must be purchased separately if required.
SKU: SOLAX-TP58TP30-INV-CABLE-5M -
All Products, EV Charging, Tesla
Tesla Gen 3 Wall Connector – Type 2 Tethered EV Charger (7kW/22kW)
Fast, intelligent home EV charging with the Tesla Gen 3 Wall Connector. Designed for both Tesla and non-Tesla electric vehicles with a Type 2 charging port, this sleek, Wi-Fi enabled charger delivers up to 7kW on single-phase or 22kW on three-phase power supplies, making it an ideal charging solution for homes, apartments, workplaces and commercial properties.
With integrated Wi-Fi connectivity, the Wall Connector receives over-the-air firmware updates and allows you to schedule, manage and monitor charging directly from the Tesla app. The lightweight, weather-resistant design makes it suitable for both indoor and outdoor installation.
⚠️ Important Installation Information
The Tesla Gen 3 Wall Connector does not include PEN fault protection.
Depending on your property’s earthing arrangement, additional protection may be required to comply with current UK wiring regulations.
This may include:
- A PEN Fault Protection Device (such as the Matt:e SP-EVCP-T)
- An isolating transformer
- A TT earthing arrangement
Your installer will determine the appropriate solution for your installation.
Installing on a typical UK domestic PME supply?
Our Tesla Wall Connector + Matt:e PEN Protection Bundle provides a convenient all-in-one solution for many domestic installations.SKU: TES-WALLCONNECTOR-G3 -
All Products, EV Charging, Tesla
Tesla Gen 3 Wall Connector + Matt:e Bundle – Type 2 Tethered EV Charger (7kW/22kW)
All Products, EV Charging, TeslaTesla Gen 3 Wall Connector + Matt:e Bundle – Type 2 Tethered EV Charger (7kW/22kW)
Charge your electric vehicle safely and efficiently with the Tesla Gen 3 Wall Connector & Matt:e PEN Fault Protection Bundle. Combining Tesla’s advanced Wi-Fi enabled EV charger with the trusted Matt:e PEN fault protection device, this package provides a safe, compliant and high-performance charging solution for UK homes and businesses.
Suitable for both Tesla and non-Tesla electric vehicles with a Type 2 charging socket, the Wall Connector delivers up to 7kW on single-phase or 22kW on three-phase electrical supplies. The included Matt:e PEN Fault Protection device helps ensure compliance for outdoor installations connected to PME earthing systems by disconnecting the charger if a dangerous PEN fault is detected. :contentReference[oaicite:0]{index=0}
✔ Why Choose This Bundle?
This bundle combines the Tesla Gen 3 Wall Connector with the Matt:e SP-EVCP-T PEN Fault Protection Device.
For many UK domestic properties with a PME (TN-C-S) electricity supply, suitable PEN fault protection is required to comply with current UK wiring regulations.
Purchasing this bundle provides both products together, making it a convenient solution for many domestic installations.
Please note: Alternative compliant installation methods are available, including TT earthing arrangements or isolating transformers. Your installer will determine the most appropriate solution for your property.
SKU: TES-WALLCONNECTOR-G3-PACK
Latest Products
-
All Products, Batteries, Batteries, CQ, Energy Storage, Fox ESS, SolaX Power
Fox ESS CQ7 7.02kWh Slave Battery – CQ7-S
All Products, Batteries, Batteries, CQ, Energy Storage, Fox ESS, SolaX PowerFox ESS CQ7 7.02kWh Slave Battery – CQ7-S
The Fox ESS CQ7 7.02kWh Slave Battery (CQ7-S) expands a compatible Fox ESS CQ7 high-voltage battery stack. Each Slave adds 7.02kWh nominal capacity and operates under the system controller / BMS contained within the CQ7-M Master battery.
- 7.02kWh nominal capacity per module
- 90% Depth of Discharge
- Internal battery heating in every module
- IP65 rated for indoor or outdoor installation
- 12-year manufacturer warranty
Important: The CQ7-S Slave battery cannot operate alone. Every CQ7 stack requires 1x CQ7-M Master battery, with Slave batteries added to reach the required capacity.
Battery sizing varies by inverter: Single-phase H1-G2, AC1-G2 and KH systems require 2-7 batteries. Three-phase H3 Smart systems require 3-12 batteries; H3 Pro requires 4-12 batteries per stack and supports up to 2 stacks; and H3 Plus requires 4-14 batteries per stack and supports up to 3 stacks. Each stack requires its own Master battery.
Fox ESS Integrations
Earn extra from your Fox ESS batteryAxle Energy runs a free Virtual Power Plant (VPP) that works with Fox ESS batteries and inverters. It occasionally exports energy from your system to support the grid - and pays you for taking part.
- £25 signup bonus when you join via our link
- £10/month minimum earnings guaranteed
- £1 per kWh exported during events
Downloads
Datasheet – Fox ESS CQ7
User Manual – Fox ESS CQ7
SKU: FE-CQ7-S -
All Products, Anker SOLIX, EV Charging
Anker SOLIX EV RFID Card
Simple and secure access control for your Anker SOLIX EV Charger with the official RFID Card. Designed for convenient tap-and-charge authentication, this card allows users to start charging instantly without requiring app setup.
Ideal for households with multiple drivers, the Anker SOLIX RFID Card supports multi-user access and can be paired with up to 10 RFID cards per charger.
Key Features
- Tap and Charge – authenticate instantly without app setup
- Multi-user access – supports up to 10 RFID cards per charger
- Durable Anker SOLIX design with protective coating against scratches, weather and wear
- 13.56MHz (HF) frequency
- 8-year data retention
SKU: ANK-EV-RFID -
All Products, Batteries, Cables, Installation Accessories, SolaX Power
SolaX Cables for Inverter to TP58 / TP30 Batteries (2m)
All Products, Batteries, Cables, Installation Accessories, SolaX PowerSolaX Cables for Inverter to TP58 / TP30 Batteries (2m)
Ensure a reliable connection between your SolaX hybrid inverter and SolaX Triple Power TP58 or TP30 battery system with this genuine SolaX battery-to-inverter cable. Designed specifically for SolaX high-voltage battery installations, this cable provides a secure and dependable connection for new installations or replacement projects.
Available in 2m and 5m lengths, allowing flexibility to suit a range of installation requirements. Positive and negative battery connectors and pins are not included and must be purchased separately if required.
SKU: SOLAX-TP58TP30-INV-CABLE-2M -
All Products, EV Charging, Tesla
Tesla Gen 3 Wall Connector – Type 2 Tethered EV Charger (7kW/22kW)
Fast, intelligent home EV charging with the Tesla Gen 3 Wall Connector. Designed for both Tesla and non-Tesla electric vehicles with a Type 2 charging port, this sleek, Wi-Fi enabled charger delivers up to 7kW on single-phase or 22kW on three-phase power supplies, making it an ideal charging solution for homes, apartments, workplaces and commercial properties.
With integrated Wi-Fi connectivity, the Wall Connector receives over-the-air firmware updates and allows you to schedule, manage and monitor charging directly from the Tesla app. The lightweight, weather-resistant design makes it suitable for both indoor and outdoor installation.
⚠️ Important Installation Information
The Tesla Gen 3 Wall Connector does not include PEN fault protection.
Depending on your property’s earthing arrangement, additional protection may be required to comply with current UK wiring regulations.
This may include:
- A PEN Fault Protection Device (such as the Matt:e SP-EVCP-T)
- An isolating transformer
- A TT earthing arrangement
Your installer will determine the appropriate solution for your installation.
Installing on a typical UK domestic PME supply?
Our Tesla Wall Connector + Matt:e PEN Protection Bundle provides a convenient all-in-one solution for many domestic installations.SKU: TES-WALLCONNECTOR-G3
