AC Chargers

Harness the power of the sun day and night with the ground-breaking Fox AC1-G2 3.7kW AC Charger. This new Gen2 model from Fox ESS is full of advanced features and is compatible with the Fox ESS high-voltage battery range.

It is important to understand that this is an AC charger (battery inverter) which means it does not have DC inputs for Solar Panels.  It can be used stand-alone or retrofitted to an existing PV system.

Features of the Fox AC1-G2 3.7kw AC Charger Gen2:

• Uses high voltage Fox ESS batteries
• Can work in parallel with up to 10x inverters in a single system
• Remote monitoring via web portal or smartphone on the Fox Cloud
• High round-trip efficiency of 97+%
• EPS (Emergency Power Supply) inbuilt. Homeowners can keep the power on during power cuts with no effect to the inverter’s output power
• IP65 protection rating – suitable for outdoor installation
• Natural cooling means no noisy fans and wide temperature tolerance
• 10-Year Warranty when registered for free
• Rated Power: 3680W

Whats in the box?

The AC1-G2 series is supplied with a Fox WiFi Datalogging Stick for use with the Fox Cloud.  LAN and 4G dataloggers are also available as optional add-ons.

A single CT Clamp is also included in the box. A second CT will be required if there’s another generator set (i.e PV, wind or other).  A meter will be required for >30m distance between inverter and incoming power connection point (sold separately.)

Connect over 40kWh Battery Storage to a single inverter

This AC Charger is compatible with any Fox ESS High Voltage batteries including Energy Cube, MIRA (HV25) and HV2600 batteries. A total of 9x Energy Cube batteries can be connected to the inverter enabling a total storage capacity of over 40kWh! (Currently applies to EQ4800 only)

The inverter can be installed in parallel with up to 10x inverters and have a a full battery stack connected to each inverter!

Have a large scale/commercial project? Please contact us for advice and pricing!

Whats new with the H1/AC1-G2 Series?

The H1/AC1 inverters from Fox ESS have been refreshed with a new, sleek design, parallel install functionality, and increased input power compare to the G1 model. The G2 also benefits from a wider battery voltage range and improved EPS functionality.

Harness the power of the sun day and night with the ground-breaking Three Phase Fox 10.0kW AC Charger. Full of advanced features and compatible with the Fox high-voltage battery range, the Fox AC3 is a new class of charge controller.

Generate energy from your solar panels during the day, once the background load is satisfied, the intelligent Fox AC Charger will direct excess energy into your battery for later use, enabling you to make the most use of your generated energy.

Charge your batteries with free, clean solar energy. Discharge your stored energy during the evening when the sun has gone down, then charge your batteries back up over night on a cheaper tariff such as Octopus GO.

Features of the Fox 10.0kW AC Charger (Three Phase):