SolaX Power
Showing 1–16 of 79 resultsSorted by popularity
-
All Products, Energy Storage, SolaX Power
SolaX CT Clamp for AC & Hybrid Inverters – CTSA016 100A (0.5m)
All Products, Energy Storage, SolaX PowerSolaX CT Clamp for AC & Hybrid Inverters – CTSA016 100A (0.5m)
SolaX CT Clamp for AC & Hybrid Inverters
Required when installing a SolaX Power battery storage system using either a SolaX AC Coupled Charger or a Hybrid Inverter.
This CT Clamp is 0.5m in length and can be extended up to 30m using standard 2-core data cable, such as Cat 5.
SKU: SX-801000 -
All Products, Batteries, Energy Storage, SolaX Power
SolaX Triple Power 5.8kWh SLAVE Battery (V2) – SolaX T58 Slave Battery
All Products, Batteries, Energy Storage, SolaX PowerSolaX Triple Power 5.8kWh SLAVE Battery (V2) – SolaX T58 Slave Battery
The market leading high-voltage SolaX Triple Power 5.8kWh SLAVE battery from SolaX/Triple Power is compatible with the full range of SolaX High Voltage hybrid inverters and AC chargers.
This product is the Triple Power 5.8kWh SLAVE battery which is used to add storage to a system using a TP58 Master Battery or for use with a SolaX BMS Parallel Box.
Battery Limits (Important)
- Minimum Battery Requirements
- 1x TP58 Master Battery
- Maximum Battery Limit
- Single Phase: 1x TP58 Master Battery + 2x TP58 Slave Batteries
- Three Phase: 1x TP58 Master Battery + 3x TP58 Slave Batteries
Need more storage? The SolaX BMS Parallel Box enables expansion up to 6 batteries (single phase) or 8 batteries (three phase). Contact us for more details!
Included in kit:
- 1x SolaX Triple Power 5.8kWh SLAVE Battery (TP58 Slave)
New system? Check out the TP58 Master battery which includes the BMS. Click here!
Features of the SolaX Triple Power 5.8kWh SLAVE Battery:
- Scalable to 46.4kWh Storage Capacity (with BMS Parallel Box)
- Floor and Wall Mountable Batteries
- High Voltage means thinner cables are required = higher efficiency
- IP65 Protection Level
- 90% Depth of Discharge (DoD)
- Max Charge/Discharge Current: 35A
- Safest LiFeP04 Battery Chemistry
- Upwards of 6000 life cycles
- Easy installation – plug and play with all cables supplied
- 10-year Warranty
- Dimensions (WxHxD) – 474 x 647 x 193 mm
- Weight – 68.5kg
Product Code: TP58 Slave
Learn More: SolaX Triple Power 5.8kWhDownloads
Datasheet – SolaX Triple Power 5.8kWh
Installation Guide – SolaX Triple Power 5.8kWh
User Manual – SolaX Triple Power 5.8kWhSKU: HV11550-58-SLAVE - Minimum Battery Requirements
-
All Products, Batteries, Energy Storage, SolaX Power
SolaX Triple Power 3.0kWh Li-ion Battery (Heated) (Battery Only) – SolaX Power TP30
All Products, Batteries, Energy Storage, SolaX PowerSolaX Triple Power 3.0kWh Li-ion Battery (Heated) (Battery Only) – SolaX Power TP30
Expand your existing SolaX storage system with The SolaX Triple Power TP30 3.0kWh High-Voltage Battery is the latest-generation LiFePO₄ module from SolaX Power. Combining long lifespan with fast charging and integrated low-temperature heating for reliable year-round performance.
This product is for the battery module only and can be used to expand an existing SolaX Triple Power (TP30) system. For new installations, a Battery Management Unit (BMU) is also required and must be purchased separately. This battery is not compatible with other brands, inverters, or earlier Triple Power variants.
Adding a 3rd and/or 4th battery? You’ll need the SolaX TP30 Installation Kit to create a second stack (maximum two batteries per stack). The kit includes the additional cables and fittings required for 3–4 battery systems. View Installation Kit
System Configuration Limits
Modules per Inverter
- X1 Hybrid G4: 1–4 batteries
- X1-FIT G4: 1–4 batteries
- X1-AC: 1–3 batteries
- X3 Hybrid: 2–4 batteries
- X3 FIT: 2–4 batteries
Parallel expansion: Using the optional BMS Parallel Box G2 doubles the overall limit to up to 8 x 3.0 kWh batteries (two sets of up to four).
Product Code: HV10230
Downloads & Videos
Datasheet – SolaX Triple Power 3.0 kWh (TP30)
Installation Manual – SolaX Triple Power 3.0 kWh (TP30)
Compatability Sheet
Warranty Document
Certificate of ConformitySKU: TRIPLE-POWER-30 -
All Products, EV Charging, Fox ESS, SolaX Power
Fox ESS 7kW L Series EV Charger – Single Phase, with Type 2 Cable
All Products, EV Charging, Fox ESS, SolaX PowerFox ESS 7kW L Series EV Charger – Single Phase, with Type 2 Cable
The Fox ESS 7kW L Series EV Charger is a single-phase, solar-ready EV charger with dynamic load balancing, scheduled charging and FoxCloud app control. Supplied with a 5m Type 2 tethered cable, it integrates seamlessly with Fox ESS solar and battery systems for intelligent home EV charging.
SKU: FE-EV-L07P -
Batteries, Energy Storage, SolaX Power
Triple Power 3.0kWh Battery Accessory Kit
This Battery Accessory / Cable kit is required when installing 3 or 4 SolaX Triple Power 3.0kWh batteries.
This is already included in our bundles, but needs to be purchased separately if you are purchasing batteries 3/4 individually to expand a system.
Included in kit:
- 1 x 1.2m Communication Cable
- 1 x 1.2m Power Cable
- 1 x Solax Battery Base
- 1 x Solax Wall Bracket
- 1 x Solar Top Cover
- 1x Earth Cable with small bag of screws.
SKU: TRIPLE-POWER-30-KIT -
AC Chargers, All Products, Energy Storage, Hybrid Inverters, SolaX Power
SolaX M1-40 Smart Meter – Single Phase Meter
AC Chargers, All Products, Energy Storage, Hybrid Inverters, SolaX PowerSolaX M1-40 Smart Meter – Single Phase Meter
The SolaX M1-40 Smart Meter is a single phase meter designed for electricity monitoring and power metering both at home and in business scenarios.
This product replaces the SolaX DDSU666-CT Single Phase CHINT Meter.
SolaX’s M1-40 meter can accurately measure the electricity parameters such as voltage, current, power, frequency and others, and be connected to other devices for system networking
This meter is compatible with Single Phase SolaX Power inverters.
Key Features of the SolaX M1-40 Smart Meter:
- Plug-and-play CT solution for easy installation
- 50ms high refresh rate for more precise and faster control
- Intelligent phase sequence and CT direction adjustment, automatically resolving installation issues
- Supports remote settings via SolaX Cloud APP
- Separates strong and weak currents for enhanced security
Whats in the Box?
- 1 x SolaX M1-40 meter
- 1 x CT with 2m cable
- 1 x 5m communication cable with an RJ45 connector
- Installation Guide
Product Code: M1-40
Learn More: SolaX Power MeterDownloads
Datasheet – SolaX Smart Meter
Installation Guide – SolaX M1-40
User Manual – SolaX Smart MeterSKU: M1-40 -
All Products, Batteries, Energy Storage, SolaX Power
SolaX Triple Power 5.8kWh MASTER Battery (V2) – SolaX T58 Master Battery
All Products, Batteries, Energy Storage, SolaX PowerSolaX Triple Power 5.8kWh MASTER Battery (V2) – SolaX T58 Master Battery
The market leading high-voltage SolaX Triple Power 5.8kWh MASTER battery from SolaX/Triple Power is compatible with the full range of SolaX High Voltage hybrid inverters and AC chargers.
This product is the Triple Power 5.8kWh MASTER battery which includes the BMS (battery management system) and the battery itself.
Battery Limits (Important)
- Minimum Battery Requirements
- 1x TP58 Master Battery
- Maximum Battery Limit
- Single Phase: 1x TP58 Master Battery + 2x TP58 Slave Batteries
- Three Phase: 1x TP58 Master Battery + 3x TP58 Slave Batteries
Need more storage? The SolaX BMS Parallel Box enables expansion up to 6 batteries (single phase) or 8 batteries (three phase). Contact us for more details!
Included in kit:
- 1x SolaX Triple Power 5.8kWh MASTER Battery (TP58 Master)
Additional Storage is available by purchasing a SLAVE Battery. Click here!
Features of the SolaX Triple Power 5.8kWh MASTER Battery:
- Scalable to 46.4kWh Storage Capacity (with BMS Parallel Box)
- Floor and Wall Mountable Batteries
- High Voltage means thinner cables are required = higher efficiency
- IP65 Protection Level
- 90% Depth of Discharge (DoD)
- Max Charge/Discharge Current: 35A
- Safest LiFeP04 Battery Chemistry
- Upwards of 6000 life cycles
- Easy installation – plug and play with all cables supplied
- 10-year Warranty
- Dimensions (WxHxD) – 474 x 708 x 193 mm
- Weight – 72.2kg
Product Code: TP58 Master
Learn More: SolaX Triple Power 5.8kWhDownloads
Datasheet – SolaX Triple Power 5.8kWh
Installation Guide – SolaX Triple Power 5.8kWh
User Manual – SolaX Triple Power 5.8kWhVideo – SolaX – Power from the sun, day and night
SKU: HV-T-BAT-H-58-MASTER - Minimum Battery Requirements
-
All Products, Batteries, Energy Storage, SolaX Power
SolaX TP-HS36 3.68kWh Battery – TP-HS36 (Battery Only)
All Products, Batteries, Energy Storage, SolaX PowerSolaX TP-HS36 3.68kWh Battery – TP-HS36 (Battery Only)
The SolaX TP-HS36 3.68kWh Battery System (T-BAT-SYS-HV-S3.6) is a new offering from SolaX Power which uses stackable 3.68kWh high-voltage battery modules.
Featuring a maximum 50A charging/discharging rate, IP65 protection and the ability to be scaled up to 47.92kWh this is a very versatile battery system suitable for many different use cases.
Battery Limits (Important)
- Minimum Battery Requirements
- Single Phase: 2x TP-HS36 Batteries
- Three Phase: 4x TP-HS36 Batteries
- Maximum Battery Limit
- Single Phase: 8x TP-HS36 Batteries
- Three Phase: 13x TP-HS36 Batteries
- X3-ULTRA: 26x TP-HS36 Batteries
Included in kit:
- 1x SolaX Triple Power TP-HS36 3.68kWh Battery (T-BAT-SYS-HV-S3.6)
Series Box, BMU sold separately or purchase our bundle and save!
Features of the SolaX Triple Power T-BAT-SYS-HV-S3.6 Battery:
- Scalable to 47.92kWh Storage Capacity
- Easy Installation – Stackable battery modules & pre-wired cables
- Unique Heating Technology for enhanced performance in lower temperature
- IP65 Protection Level
- Soft Start Protection
- Safest LiFeP04 Battery
- Remote fault diagnosis, upgrade and maintenance
- Compact Design
- 90% Depth of Discharge (DOD)
- Upwards of 6000 life cycles
- 10-year Warranty
- Dimensions (LxWxH) – 510 x 365 x 152mm
- Weight – 33.5kg
Product Code: TP-HS36
Learn More: SolaX Triple Power TP-HS36Downloads
Datasheet – SolaX TP-HS36
Installation Guide – SolaX TP-HS36
User Manual – SolaX TP-HS36Video – SolaX TP-HS25 & TP-HS36 Installation Guide
SKU: TP-HS36 - Minimum Battery Requirements
-
All Products, Batteries, Energy Storage, SolaX Power
SolaX BMS Parallel Box G2 for Triple Power T58 Batteries
All Products, Batteries, Energy Storage, SolaX PowerSolaX BMS Parallel Box G2 for Triple Power T58 Batteries
The second generation SolaX BMS Parallel Box G2 is here; enabling you to double up on battery storage capacity when using the SolaX Triple Power 5.8kWh batteries.
Encompassing the very latest LFP technology ensures much safer installations with wider temperature tolerances. The parallel box helps to prolong battery life due to the alternate use of dual module.
Key Features of the SolaX BMS Parallel Box G2:
- Increase the capacity of your battery storage
- Dual-module in case
- Convenient capacity for expansion
- Prolong the batteries life due to the alternate use of dual-module
- Works with SolaX T58 Batteries
- Have T30 Batteries? Please see this product: SolaX BMS Parallel Box G2 for Triple Power T30 Batteries
Whats new on the G2 Parallel Box?
- Now works with T58 5.8kWh MASTER batteries, meaning it is easier to retro-fit to existing systems.
How many batteries can I install with this product?
- Single Phase: Install either 2, 4 or 6
- Three Phase: Install either 4, 6 or 8
PLEASE NOTE: A minimum of 2 batteries (single phase) and 4 batteries (three-phase) must be used with this product.
PLEASE NOTE: BMS module must be used – please refer to diagram in images or the user manual for details of setup and configuration/design.
Downloads
Datasheet – BMS Parallel Box G2
User Manual – BMS Parallel Box G2HAVE QUESTIONS ABOUT THIS PRODUCT OR LOOKING FOR ADVICE FOR A BATTERY STORAGE SYSTEM? CONTACT US!
SKU: BMS-PARALLEL-BOX-G2 -
All Products, Energy Storage, Hybrid Inverters, Single Phase, SolaX Power
SolaX X1 Hybrid 7.5kW G4 Inverter
All Products, Energy Storage, Hybrid Inverters, Single Phase, SolaX PowerSolaX X1 Hybrid 7.5kW G4 Inverter
The SolaX X1 Hybrid 7.5kW G4 is the 4th generation of the SolaX Hybrid range, retaining all the key features of the 3rd generation while making some welcome improvements.
The Gen4 has been designed and developed using the very latest solar technology. SolaX have pushed back the boundaries for what is possible when designing a storage inverter.
The ground-breaking SolaX X1 Hybrid 7.5kW G4 is an inverter that can also store surplus energy in batteries for later use. It is important to understand that this is a hybrid solar PV inverter and battery storage controller. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter.
- In-built EPS changeover switch
- Supports up to 150% PV oversizing and 110% overload output
- Can work at full capacity down to -35C
- 97.0% Charge/discharge efficiency
- On-grid and off-grid use
- 5 work modes, 2 charging periods available
- IP65 protection level
- CT compatible, loads respond within 0.3s
- 30 Minute Total Installation Time
- Includes WiFi Dongle
SKU: X1-G4-HYBRID-7.5 -
All Products, Batteries, Energy Storage, SolaX Power
SolaX Triple Power 5.8kWh SLAVE Battery (V3) – SolaX TP58 Slave Battery – HV11550(H) V3
All Products, Batteries, Energy Storage, SolaX PowerSolaX Triple Power 5.8kWh SLAVE Battery (V3) – SolaX TP58 Slave Battery – HV11550(H) V3
Improved performance and flexibility with the latest SolaX Triple Power 5.8kWh SLAVE Battery (V3). This high-voltage lithium iron phosphate (LiFePO₄) battery offers increased usable capacity, improved environmental protection and built-in battery heating as standard for the UK market.
The TP58 V3 SLAVE battery provides 5.8kWh nominal capacity with an increased 95% Depth of Discharge and a 10-year warranty. It is designed to expand existing SolaX Triple Power systems that already include a TP58 Master battery.
Important: This is a SLAVE battery and cannot operate on its own. A TP58 Master battery is required. You cna purchase a master battery HERE.
Compatibility: T58 V3 batteries maintain compatibility with existing V2 systems, allowing seamless replacement or expansion of installed systems.
Battery Configuration Limits (Important)
- Minimum Requirement
- 1x TP58 Master Battery (V2 or V3)
- Maximum Batteries per Inverter (Without Parallel Box)
- Single Phase: 1x Master + up to 2x Slave batteries
- Three Phase: 1x Master + up to 5x Slave batteries
Note: The increased limit of 6 batteries per cluster applies to three-phase systems only.
Single-phase systems retain the same limits as previous generations.Important: The T58 V3 battery is not compatible with the current SolaX BMS Parallel Box G2.
Key Features of the SolaX Triple Power 5.8kWh SLAVE Battery (V3)
- 5.8kWh nominal capacity per battery
- 95% Depth of Discharge (DoD) for higher usable energy
- Built-in battery heating (standard for UK market)
- IP66 Rated – enhanced dust and water resistance
- High voltage LiFePO₄ chemistry for safety and efficiency
- Up to 6 batteries per cluster (three-phase systems only)
- Aerosol fire suppression for enhanced safety protection
- 50A peak discharge current (short duration)
- 6000+ life cycles at 95% DoD
- Wall or floor mountable
- CAN / RS485 communication
- 10-year manufacturer warranty
Physical Specifications
- Dimensions (WxHxD): 474 × 715 × 150 mm
- Weight: 59.5 ± 1 kg
Compatibility
- Compatible with SolaX high-voltage hybrid inverters
- Designed for use with TP58 Master batteries (V2 & V3)
- Not compatible with BMS Parallel Box G2
Frequently Asked Questions
What is the SolaX Triple Power 5.8kWh SLAVE Battery (V3)?
The TP58 V3 SLAVE is a high-voltage 5.8kWh lithium battery designed to expand existing SolaX Triple Power systems. It offers higher usable capacity, IP66 protection and integrated battery heating.Can this battery be used on its own?
No. This is a SLAVE battery and requires a TP58 Master battery to operate.Is the V3 battery compatible with older V2 systems?
Yes. The T58 V3 maintains compatibility with existing V2 systems, allowing seamless replacement or expansion.Does it work with the SolaX BMS Parallel Box?
No. The T58 V3 is not compatible with the current SolaX BMS Parallel Box G2.What warranty is included?
The battery includes a 10-year manufacturer warranty and is rated for over 6000 cycles at 95% Depth of Discharge.
Product Code: HV11550(H) V3
Learn More: SolaX Triple Power 5.8kWh V3
Downloads
Datasheet – SolaX Triple Power 5.8kWh V3
User Manual – SolaX Triple Power 5.8kWh V3
Order the SolaX Triple Power 5.8kWh SLAVE Battery (V3) today from The Eco Supermarket for fast UK delivery, expert technical support and full manufacturer warranty.
SKU: HV11550(H)-V3 - Minimum Requirement
-
All Products, Energy Storage, Hybrid Inverters, Single Phase, SolaX Power
SolaX X1 Hybrid 3.7kW G4 Inverter
All Products, Energy Storage, Hybrid Inverters, Single Phase, SolaX PowerSolaX X1 Hybrid 3.7kW G4 Inverter
The SolaX X1 Hybrid 3.7kW G4 is the 4th generation of the SolaX Hybrid range, retaining all the key features of the 3rd generation while making some welcome improvements.
The Gen4 has been designed and developed using the very latest solar technology. SolaX have pushed back the boundaries for what is possible when designing a storage inverter.
The ground-breaking SolaX X1 Hybrid 3.7kW G4 is an inverter that can also store surplus energy in batteries for later use. It is important to understand that this is a hybrid solar PV inverter and battery storage controller. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter.
- In-built EPS changeover switch
- Supports up to 150% PV oversizing and 110% overload output
- Can work at full capacity down to -35C
- 97.0% Charge/discharge efficiency
- On-grid and off-grid use
- 5 work modes, 2 charging periods available
- IP65 protection level
- CT compatible, loads respond within 0.3s
- 30 Minute Total Installation Time
- Includes WiFi Dongle
Downloads
Datasheet – SolaX X1 Hybrid G4
Video
SKU: X1-G4-HYBRID-3.7 -
AC Chargers, All Products, Energy Storage, SolaX Power
SolaX Power X1-FIT 3.7kW G4 Retrofit AC Charger – SolaX X1 FIT
AC Chargers, All Products, Energy Storage, SolaX PowerSolaX Power X1-FIT 3.7kW G4 Retrofit AC Charger – SolaX X1 FIT
The SolaX Power X1-FIT 3.7kw Gen4 AC Charger is the latest in the Single Phase X1 Retrofit AC Charger range.
Generate energy from your solar panels during the day, once the background load is satisfied, the intelligent SolaX Power X1-FIT 3.7kw Charger will direct excess energy into your battery for later use, enabling you to make the most use of your generated energy.
Charge your batteries with free, clean solar energy. Discharge your stored energy during the evening when the sun has gone down, then charge your batteries back up over night on a cheaper tariff such as Octopus GO.
If your home experiences a loss of power, the X1 Retro Fit will then send the stored power back to the home, ensuring you are never left in the dark even during a power-cut. Compatible with every inverter manufacturer, the X1 Retro Fit charger is the perfect upgrade to your system when paired with SolaX Triple Power Batteries.
Key Features:
- Maximum efficiency up to 97%
- Online Monitoring
- Remote Upgrade and Control
- Plug & Play Installation
- Add to existing PV System
- VPP Function
- Working Temp -40°C to 65°C
- IP65 Protection Level
SKU: X1-FIT-3.7-W -
AC Coupled, All Products, Battery Bundles, Energy Storage, SolaX Power
SolaX X1-FIT + T58 Battery Bundle (5.8 – 34.8kWh) – Single Phase Retrofit Battery System
AC Coupled, All Products, Battery Bundles, Energy Storage, SolaX PowerSolaX X1-FIT + T58 Battery Bundle (5.8 – 34.8kWh) – Single Phase Retrofit Battery System
Our SolaX X1-FIT + T58 Battery Bundle is a domestic (single-phase), high-voltage AC-coupled battery storage system utilising the SolaX Triple Power 5.8kWh Batteries and SolaX Power X1-FIT G4 AC Charger.
This system is ideal as a retrofit to existing PV installations or for battery-only installations without Solar PV.
This bundle is scalable up to a maximum of 34.8kWh of battery storage capacity using 6x SolaX Power Triple Power 5.8kWh batteries, SolaX AC Charger and BMS Parallel Box. Add additional batteries either now or post-install to expand your storage capacity.
Battery Limits (Important)
- Minimum Battery Requirements
- 1x Battery (5.8kWh)
- Maximum Battery Limit
- 6x Batteries (34.8kWh) (Parallel Box required for more than 3x batteries)
SolaX X1-FIT + T58 Battery Bundle (5.8 – 34.8kWh) contains:
- 1x SolaX Power X1-FIT G4 AC Charger (3.7kW, 5kW or 7.5kW)
- 1x SolaX Power Triple Power 5.8kWh MASTER Battery (inc BMS)
- Optionally add up to 5x additional 5.8kWh SLAVE Batteries
- 1x WiFi Dongle (For remote system monitoring via SolaX Cloud)
- 1x SolaX M1-40 Smart Meter
- All necessary battery/inverter cables
- SolaX BMS Parallel Box (included if purchasing 4-6 batteries)
Features of the SolaX Triple Power 5.8kWh Battery:
- Floor and Wall Mountable Batteries
- High Voltage means thinner cables are required = higher efficiency
- IP65 Protection Level
- 90% Depth of Discharge (DoD)
- Max Charge/Discharge Current: 35A
- Safest LiFeP04 Battery Chemistry
- Upwards of 6000 life cycles
- Easy installation – plug and play with all cables supplied
- 10-year Warranty
- Dimensions (WxHxD) – 474 x 708 x 193 mm (Master) // 474 x 647 x 193 mm (Slave)
- Weight – 72.2kg (Master) // 68.5kg (Slave)
Features of the SolaX Power X1-FIT G4 AC Charger:
- Maximum efficiency up to 97%
- Online Monitoring
- Remote Upgrade and Control
- Plug & Play Installation
- Retrofit to existing Solar PV System
- VPP Function
- Wide working Temperature Range: -40°C to 65°C
- IP65 Rated Protection Level
- Supports Parallel Installation
Generate energy from your solar panels during the day, once the background load is satisfied, the intelligent SolaX X1-FIT G4 AC Charger will direct excess energy into your battery for later use. This enables you you to make the most use of your generated energy.
CONFUSED BY ALL THE BATTERY STORAGE OPTIONS? WE’RE HERE TO HELP! EMAIL US, USE OUR LIVE CHAT OR CALL US ON 02476 981 489 TO SPEAK TO ONE OF OUR TEAM FOR HELP, ADVICE OR TO BUILD A BESPOKE SYSTEM.
Learn More: SolaX Triple Power 5.8kWh
Downloads
Datasheet – SolaX Triple Power 5.8kWh
Installation Guide – SolaX Triple Power 5.8kWh
User Manual – SolaX Triple Power 5.8kWhDatasheet – SolaX X1-FIT G4
Installation Guide – SolaX X1-FIT G4Video – SolaX – Power from the sun, day and night
SKU: SOLAX-X1-FIT-T58-BUNDLE - Minimum Battery Requirements
-
All Products, Batteries, Energy Storage, SolaX Power
SolaX BMS Parallel Box – for Triple Power 5.8 Battery
All Products, Batteries, Energy Storage, SolaX PowerSolaX BMS Parallel Box – for Triple Power 5.8 Battery
The SolaX BMS Parallel Box V2 (Version II) enables you to double up on battery storage capacity when using the Triple Power 5.8kWh batteries.
The BMS parallel box acts as a replacement for the Master battery. You cannot use a Master battery in your system if you have the parallel box installed. If retro-fitting the parallel box to an existing system then the existing Master battery becomes redundant.
Features of the SolaX BMS Parallel Box:
- Wide temperature tolerance
- Dual-module in case
- Convenient capacity for expansion
- Prolong the batteries life due to the alternate use of dual-module
Encompassing the very latest LFP technology ensures much safer installations with wider temperature tolerances. The parallel box helps to prolong battery life due to the alternate use of dual module.
How many batteries can I install with this product?
- Single Phase: Install either 2, 4 or 6 Triple Power 5.8kWh SLAVE batteries
- Three Phase: Install either 4, 6, 8 Triple Power 5.8kWh SLAVE batteries
PLEASE NOTE: A minimum of 2 batteries (single phase) and 4 batteries (three-phase) must be used with this product.
HAVE QUESTIONS ABOUT THIS PRODUCT OR LOOKING FOR ADVICE FOR A BATTERY STORAGE SYSTEM? CONTACT US!
SKU: BMS-PARALLEL-T58
