Shop
Showing 151–165 of 409 results
-
All Products, Immersion Controllers, Installation Accessories, myenergi
myenergi Eddi V2.1 Solar Power Diverter (WiFi Enabled)
All Products, Immersion Controllers, Installation Accessories, myenergimyenergi Eddi V2.1 Solar Power Diverter (WiFi Enabled)
The myenergi Eddi v2.1 is WiFi enabled which allows it to connect to the internet and be controlled remotely.
Eddi V2.1 is an eco-smart energy management system which diverts surplus power from your solar PV or wind generation to a designated heating appliance (or two sequentially). This excess energy will go directly to a designated appliance such as an immersion heater.
myenergi Eddi allows you to stop exporting energy back to the grid & saves you money on your energy bill.
Internet connected & remote controllable option with the myenergi hub. Learn more about the hub and shop now by clicking HERE.
Works with heat pumps when used with optional Relay & Sensor Board. Learn more about the relay board and shop now by clicking HERE.
Add myenergi harvi for wireless communication, order HERE.- 3.68kW / 16A max heater load
- Expansion module option – 2 extra outputs with temperature control
- Integral bypass switch
- Graphical back-lit LCD screen for ease of use
- Fan-less cooling
- Built-in programmable boost timers
- VariSineTM PWM technology
- Supports two heaters (sequentially)
- Wall mounting bracket for ease of installation
- Overload and short-circuit protection
- Ethernet port and built-in WiFi for connecting to the internet
- Complies with CE and UKCA Requirements
- Works alongside battery storage systems
- Energy monitoring on the go via the myenergi app
SKU: MYEN-EDDI-16A1P02H -
All Products, Immersion Controllers, Installation Accessories, myenergi
myenergi harvi – Energy Harvesting Wireless Sensor
All Products, Immersion Controllers, Installation Accessories, myenergimyenergi harvi – Energy Harvesting Wireless Sensor
The myenergi harvi is an essential part of the installation process, saving time and money. This intelligent device enables myenergi’s products to be installed remote from the current transformers.
myenergi harvi communicates wirelessly with eddi and zappi, which eliminates unsightly wiring around the home prevents the need to lift up floors and disrupt home decor.
Its patented technology is the only one of its kind, harvesting it’s own power from the CT clamps, removing the need for batteries or an external power supply.
SKU: MYEN-HARVI-65A3P -
All Products, Immersion Controllers, Installation Accessories, myenergi
myenergi Hub Remote Monitoring Unit
All Products, Immersion Controllers, Installation Accessories, myenergimyenergi Hub Remote Monitoring Unit
The myenergi hub provides internet connectivity to your myenergi devices making them smart. The hub and app work together to remotely control and monitor your products from anywhere in the world.
The hub also allows you to carry out firmware updates to keep your myenergi products equipped with all the latest features.
App Features:
- Remotely control & monitor on your mobile device
- Change your zappi charging modes
- Pre-set your geating & hot water of your eddi
- Remotely manually boost your eddi or zappi
- Adjust zappi minimum green charging level
- Observe domestic live energy flow
- View consumption, generation & diverted energy data hub device required to use the app
Hub Features:
- Remotely control & monitor your myenergi devices
- Comes with ethernet cable for direct connection to your internet router
- Remotely control & monitor on your mobile device
- Status LED’s – show if energy is being diverted by your myenergi products Access to the latest firmware updates
- Required for zappi OLEV approval
SKU: MYEN-HUB -
All Products, Energy Storage, Pylontech, US2000
Pylontech US2000C 2.4kWh Battery 48V (excl. brackets)
All Products, Energy Storage, Pylontech, US2000Pylontech US2000C 2.4kWh Battery 48V (excl. brackets)
The new Pylontech US2000C 2.4kWh battery from Pylon now boasts 95% DoD and a 10 year warranty. The batteries are modular so banks can be built up in units of 2.4kWh and they are simply daisy chained together.
Parallel links are included with the battery, however you will require brackets for mounting (sold separately – click here)
Key features of the Pylontech US2000C 2.4kWh Battery:
- 95% Depth of discharge
- Install up to 16 batteries in a single stack without additional hardware
- >6000 Life Cycles
- Modular design for ease of expansion
- Intelligent BMS protecting battery cells
- RS485 and CAN compatible
- Installation flexibility (Rack mount or Wall-mount)
- Warranty 10 Years (7 as standard, additional 3 upon free homeowner registration – see warranty doc below for details)
Downloads
Product Datasheet – Pylon US2000C/US3000C /US5000
User Manual – Pylon US2000C
Warranty Document – Pylon US2000C/US3000C/US5000
Compatibility Sheet – Pylontech BatteriesSKU: US2000C -
All Products, Energy Storage, Installation Accessories, Mounting, Pylontech, US2000
Pylontech US2000 Stackable Brackets
All Products, Energy Storage, Installation Accessories, Mounting, Pylontech, US2000Pylontech US2000 Stackable Brackets
Pylontech US2000 Stackable Brackets for holding together stacks of Pylontech US2000C battery units. The price is per bracket set (one needed per additional battery added to system).Downloads
SKU: US2000-BRACKET -
All Products, Energy Storage, Pylontech, US3000
Pylontech US3000C 3.5kWh Battery 48V (excl. brackets)
All Products, Energy Storage, Pylontech, US3000Pylontech US3000C 3.5kWh Battery 48V (excl. brackets)
The new Pylontech US3000C 3.5kWh battery from Pylon now boasts 95% DoD and a 10 year warranty. The batteries are modular so banks can be built up in units of 3.5kWh and they are simply daisy chained together. You can have up to 16 units in parallel.
Developed with Pylontechs own lithium-ion phosphate cell to ensure the highest safety value and life cycle. A self designed BMS protects the cell from abnormal temperature, current, voltage, SoC and SoH.
Parallel links are included with the battery, however you will require brackets for mounting (sold separately – click here)
Key features of the Pylontech US3000C 3.5kWh Battery:
- 95% Depth of discharge
- Install up to 16 batteries in a single stack without additional hardware
- >6000 Life Cycles
- Modular design for ease of expansion
- Intelligent BMS protecting battery cells
- RS485 and CAN compatible
- Installation flexibility (Rack mount or Wall-mount)
- Warranty 10 Years (7 as standard, additional 3 upon free homeowner registration – see warranty doc below for details)
Downloads
Product Datasheet – Pylon US2000C/US3000C /US5000
User Manual – Pylon US3000C
Warranty Document – Pylon US2000C/US3000C/US5000
Compatibility Sheet – Pylontech BatteriesSKU: PYLON-US3000C -
All Products, Energy Storage, Installation Accessories, Mounting, Pylontech, US3000
Pylontech US3000 Stackable Brackets
All Products, Energy Storage, Installation Accessories, Mounting, Pylontech, US3000Pylontech US3000 Stackable Brackets
Pylontech US3000 Stackable Brackets for holding together stacks of Pylontech US3000 and/or Pylontech US3000C battery units. The price is per bracket set (one needed per additional battery added to system).SKU: BRACK-US3000 -
All Products, Energy Storage, Pylontech, US5000
Pylontech US5000-1C 4.8kWh Battery 48V (excl. brackets)
All Products, Energy Storage, Pylontech, US5000Pylontech US5000-1C 4.8kWh Battery 48V (excl. brackets)
Enhanced Performance with the Pylontech US5000-1C 4.8kWh Battery — the latest revision of Pylontech’s trusted LiFePO4 solar storage solution.
Note: Brackets for mounting each battery are sold separately. Parallel links are included with the battery.
System Configuration Limits
Maximum Capacity:
16x US5000-1C batteries = 72.96kWh total (no LV Hub required)
Key Features of the Pylontech US5000-1C 4.8kWh Battery:
- Usable Capacity 4560Wh per module
- 95% Depth of Discharge (DoD) with more usable energy
- Scalable up to 72.96kWh (16 units in parallel)
- Improved Operation Logic (0.8C → 1.0C)
- Intelligent BMS protecting battery cells
- >6000 Life Cycles for long-term reliability
- Modular Design — simple daisy-chain connection
- RS485 and CAN compatible for seamless integration
- Rack-mount or Wall-mount Installation flexibility
- Compatible with Tier 1 inverter brands
- 10-Year Warranty (7 years standard + 3 years free upon registration)
Compatibility
Please refer to the Compatibility Sheet linked below, or contact us via phone, email, or live chat for clarification.
Note: Mixing with US2000C and US3000C modules in the same system is supported.
Frequently Asked Questions
How many Pylontech US5000-1C batteries can I connect?
You can connect up to 16 units in parallel, giving a total usable capacity of 72.96 kWh (no LV Hub required).What is the warranty period?
7 years as standard, extendable to a full 10 years when you register the battery on the Pylontech website (see Warranty Registration section).What is the usable capacity of each module?
Each US5000-1C provides 4560 Wh usable (95% DoD).Is it compatible with my inverter?
It’s compatible with most Tier-1 inverter brands via CAN/RS485. Please check the Compatibility Sheet in the Downloads section for confirmed models.Can I mix US5000-1C with US2000 or US3000 batteries in the same system?
Yes. You can mix US5000-1C with US2000C and US3000C in the same system. For best results, bring all batteries to the same state of charge before connecting and keep BMS firmware up to date. Contact us for more information.
Product Code: PYLON-US5000-1C
Learn More: Pylontech US Series Support
Downloads
Product Datasheet – Pylon US2000C / US3000C / US5000
User Manual – Pylon US5000
Warranty Document – Pylon US2000C / US3000C / US5000
Compatibility Sheet – Pylontech Batteries
SKU: PYLON-US5000 -
All Products, Energy Storage, Installation Accessories, Mounting, Pylontech, US5000
Pylontech US5000 Stackable Brackets
All Products, Energy Storage, Installation Accessories, Mounting, Pylontech, US5000Pylontech US5000 Stackable Brackets
Pylontech US5000 Stackable Brackets for holding together stacks of Pylontech US5000 battery units. The price is per bracket set (one needed per additional battery added to system).SKU: BRACK-US5000 -
Q Cells, Solar Panels
Q Cells 345W G9+ Mono Q Peak Duo All Black
The Q Cells 345W G9+ Mono Q Peak Duo All Black solar panel comes with an incredible 25 year warranty and a 25 year performance warranty.
- Q.ANTUM DUO Z technology with zero gap cell layout boosts module efficiency up to 20.3%
- Innovative All Weather Technology: Optimal yeilds, whatever the weater and excellent low-light and tempreture behaviour.
- Enduring High Performance: Long-term yield security with Anti LID Technology, Anti PID Technology, Hot-Spot Protect and Traceable Quality Tra.Q.
- Extreme Weather Rating: High Tech alloy frame, certified for 6000Pa snow loads and 4000Pa wind loads.
This module is 17.5kg in weight and comes with Staubli MC4 connectors. This all black module is perfect for residential systems.
SKU: Q.PEAK-BLK-G9PLUS-DUO-345 -
Sofar Single MPPT, Sofar Solar, Solar Inverters
Sofar 1100 TL-G3 Single Phase Inverter (1 MPPT) (DC + WiFi)
Sofar Single MPPT, Sofar Solar, Solar InvertersSofar 1100 TL-G3 Single Phase Inverter (1 MPPT) (DC + WiFi)
The Sofar 1100 TL-G3 Single Phase inverter combines the key features of the previous models in a smaller and sleeker design. With built-in export limitation via a CT clamp and DC oversizing capability of 140%, there is a lot of flexibility in the projects the TL-G3 can be used for. A low start-up voltage of 70V ensures that systems will be producing for longer every day. DC and WiFi are included as standard.
The new G3 range of Sofar inverters now come with a zero export & export control options via a CT clamp.
Sofar 1100 TL-G3 Specifications:
- No of MPPT: 1
- Built-in zero export functionality via a CT clamp
-
Max. efficiency 97.5%
- Indoor or outdoor installation – IP65
- Supports 140% DC oversizing
- Natural cooling, no fans, low noise
- Warranty: 10 years (option to extend to either 15 years or 20 years.)
-
Start up voltage: 70V
- Includes DC and WiFi as standard
Note to end users:
Can end-users purchase this product to save money on the cost of a replacement inverter? Yes, of course! Simply purchase the inverter and arrange for a local qualified electrician to install the unit for you (should be a 1-2 hour call-out). By sourcing the inverter yourself, you can make a huge saving on the prices quoted by installation companies for supply and fit services.
SKU: 1100-TL-G3 -
Sofar Single MPPT, Sofar Solar, Solar Inverters
Sofar 1600 TL-G3 Single Phase Inverter (1 MPPT) (DC + WiFi)
Sofar Single MPPT, Sofar Solar, Solar InvertersSofar 1600 TL-G3 Single Phase Inverter (1 MPPT) (DC + WiFi)
The Sofar 1600 TL-G3 Single Phase inverter combines the key features of the previous models in a smaller and sleeker design. With built-in export limitation via a CT clamp and DC oversizing capability of 140%, there is a lot of flexibility in the projects the TL-G3 can be used for. A low start-up voltage of 70V ensures that systems will be producing for longer every day. DC and WiFi are included as standard.
The new G3 range of Sofar inverters now come with a zero export & export control options via a CT clamp.
Sofar 1600 TL-G3 Specifications:
- No of MPPT: 1
- Built-in zero export functionality via a CT clamp
-
Max. efficiency 97.5%
- Indoor or outdoor installation – IP65
- Supports 140% DC oversizing
- Natural cooling, no fans, low noise
- Warranty: 10 years (option to extend to either 15 years or 20 years.)
-
Start up voltage: 70V
- Includes DC and WiFi as standard
Note to end users:
Can end-users purchase this product to save money on the cost of a replacement inverter? Yes, of course! Simply purchase the inverter and arrange for a local qualified electrician to install the unit for you (should be a 1-2 hour call-out). By sourcing the inverter yourself, you can make a huge saving on the prices quoted by installation companies for supply and fit services.
SKU: 1600-TL-G3 -
Sofar Single MPPT, Sofar Solar, Solar Inverters
Sofar 2200 TL-G3 Single Phase Inverter (1 MPPT) (DC + WiFi)
Sofar Single MPPT, Sofar Solar, Solar InvertersSofar 2200 TL-G3 Single Phase Inverter (1 MPPT) (DC + WiFi)
The Sofar 2200 TL-G3 Single Phase inverter combines the key features of the previous models in a smaller and sleeker design. With built-in export limitation via a CT clamp and DC oversizing capability of 140%, there is a lot of flexibility in the projects the TL-G3 can be used for. A low start-up voltage of 70V ensures that systems will be producing for longer every day. DC and WiFi are included as standard.
The new G3 range of Sofar inverters now come with a zero export & export control options via a CT clamp.
Sofar 2200 TL-G3 Specifications:
- No of MPPT: 1
- Built-in zero export functionality via a CT clamp
-
Max. efficiency 97.5%
- Indoor or outdoor installation – IP65
- Supports 140% DC oversizing
- Natural cooling, no fans, low noise
- Warranty: 10 years (option to extend to either 15 years or 20 years.)
-
Start up voltage: 70V
- Includes DC and WiFi as standard
Note to end users:
Can end-users purchase this product to save money on the cost of a replacement inverter? Yes, of course! Simply purchase the inverter and arrange for a local qualified electrician to install the unit for you (should be a 1-2 hour call-out). By sourcing the inverter yourself, you can make a huge saving on the prices quoted by installation companies for supply and fit services.
SKU: 2200-TL-G3 -
Sofar Single MPPT, Sofar Solar, Solar Inverters
Sofar 2700 TL-G3 Single Phase Inverter (1 MPPT) (DC + WiFi)
Sofar Single MPPT, Sofar Solar, Solar InvertersSofar 2700 TL-G3 Single Phase Inverter (1 MPPT) (DC + WiFi)
The Sofar 2700 TL-G3 Single Phase inverter combines the key features of the previous models in a smaller and sleeker design. With built-in export limitation via a CT clamp and DC oversizing capability of 140%, there is a lot of flexibility in the projects the TL-G3 can be used for. A low start-up voltage of 70V ensures that systems will be producing for longer every day. DC and WiFi are included as standard.
The new G3 range of Sofar inverters now come with a zero export & export control options via a CT clamp.
Sofar 2700 TL-G3 Specifications:
- No of MPPT: 1
- Built-in zero export functionality via a CT clamp
-
Max. efficiency 97.5%
- Indoor or outdoor installation – IP65
- Supports 140% DC oversizing
- Natural cooling, no fans, low noise
- Warranty: 10 years (option to extend to either 15 years or 20 years.)
-
Start up voltage: 70V
- Includes DC and WiFi as standard
Note to end users:
Can end-users purchase this product to save money on the cost of a replacement inverter? Yes, of course! Simply purchase the inverter and arrange for a local qualified electrician to install the unit for you (should be a 1-2 hour call-out). By sourcing the inverter yourself, you can make a huge saving on the prices quoted by installation companies for supply and fit services.
SKU: 2700-TL-G3 -
Sofar Dual MPPT, Sofar Solar, Solar Inverters
Sofar 3000 KTLM-G3 Single Phase Inverter (2 MPPT) (DC + WiFi)
Sofar Dual MPPT, Sofar Solar, Solar InvertersSofar 3000 KTLM-G3 Single Phase Inverter (2 MPPT) (DC + WiFi)
The Sofar 3000 KTLM-G3 Single Phase Dual MPPT inverter boasts a maximum efficiency of 98% and harnesses a real-time, precise MPPT algorithm harvest to achieve high yields. It offers a nifty all-in-one approach to design and allows for a wide range of installation locations thanks to its dual MPPT and IP65 rating. DC and WiFi are included as standard.
The new G3 range of Sofar inverters now come with a zero export & export control options via a CT clamp.
Sofar 3000 KTLM-G3 Specifications:
- No of MPPT: 2
- Built-in zero export functionality via a CT clamp
-
Max. efficiency 98.2%
- Indoor or outdoor installation – IP65
- Two MPP trackers with 1.5*DC overload
- Smart monitoring, remote firmware upgrades
- Natural cooling, no fans, low noise
- Warranty: 10 years (option to extend to either 15 years or 20 years.)
-
Start up voltage: 60V
- Includes DC and WiFi built-in as standard
Note to end users:
Can end-users purchase this product to save money on the cost of a replacement inverter? Yes, of course! Simply purchase the inverter and arrange for a local qualified electrician to install the unit for you (should be a 1-2 hour call-out). By sourcing the inverter yourself, you can make a huge saving on the prices quoted by installation companies for supply and fit services.
SKU: 3000-KTLM-G3
Latest Products
-
All Products, Batteries, Batteries, CQ, Energy Storage, Fox ESS, SolaX Power
Fox ESS CQ7 7.02kWh Slave Battery – CQ7-S
All Products, Batteries, Batteries, CQ, Energy Storage, Fox ESS, SolaX PowerFox ESS CQ7 7.02kWh Slave Battery – CQ7-S
The Fox ESS CQ7 7.02kWh Slave Battery (CQ7-S) expands a compatible Fox ESS CQ7 high-voltage battery stack. Each Slave adds 7.02kWh nominal capacity and operates under the system controller / BMS contained within the CQ7-M Master battery.
- 7.02kWh nominal capacity per module
- 90% Depth of Discharge
- Internal battery heating in every module
- IP65 rated for indoor or outdoor installation
- 12-year manufacturer warranty
Important: The CQ7-S Slave battery cannot operate alone. Every CQ7 stack requires 1x CQ7-M Master battery, with Slave batteries added to reach the required capacity.
Battery sizing varies by inverter: Single-phase H1-G2, AC1-G2 and KH systems require 2-7 batteries. Three-phase H3 Smart systems require 3-12 batteries; H3 Pro requires 4-12 batteries per stack and supports up to 2 stacks; and H3 Plus requires 4-14 batteries per stack and supports up to 3 stacks. Each stack requires its own Master battery.
Fox ESS Integrations
Earn extra from your Fox ESS batteryAxle Energy runs a free Virtual Power Plant (VPP) that works with Fox ESS batteries and inverters. It occasionally exports energy from your system to support the grid - and pays you for taking part.
- £25 signup bonus when you join via our link
- £10/month minimum earnings guaranteed
- £1 per kWh exported during events
Downloads
Datasheet – Fox ESS CQ7
User Manual – Fox ESS CQ7
SKU: FE-CQ7-S -
All Products, Anker SOLIX, EV Charging
Anker SOLIX EV RFID Card
Simple and secure access control for your Anker SOLIX EV Charger with the official RFID Card. Designed for convenient tap-and-charge authentication, this card allows users to start charging instantly without requiring app setup.
Ideal for households with multiple drivers, the Anker SOLIX RFID Card supports multi-user access and can be paired with up to 10 RFID cards per charger.
Key Features
- Tap and Charge – authenticate instantly without app setup
- Multi-user access – supports up to 10 RFID cards per charger
- Durable Anker SOLIX design with protective coating against scratches, weather and wear
- 13.56MHz (HF) frequency
- 8-year data retention
SKU: ANK-EV-RFID -
All Products, Batteries, Cables, Installation Accessories, SolaX Power
SolaX Cables for Inverter to TP58 / TP30 Batteries (2m)
All Products, Batteries, Cables, Installation Accessories, SolaX PowerSolaX Cables for Inverter to TP58 / TP30 Batteries (2m)
Ensure a reliable connection between your SolaX hybrid inverter and SolaX Triple Power TP58 or TP30 battery system with this genuine SolaX battery-to-inverter cable. Designed specifically for SolaX high-voltage battery installations, this cable provides a secure and dependable connection for new installations or replacement projects.
Available in 2m and 5m lengths, allowing flexibility to suit a range of installation requirements. Positive and negative battery connectors and pins are not included and must be purchased separately if required.
SKU: SOLAX-TP58TP30-INV-CABLE-2M -
All Products, EV Charging, Tesla
Tesla Gen 3 Wall Connector – Type 2 Tethered EV Charger (7kW/22kW)
Fast, intelligent home EV charging with the Tesla Gen 3 Wall Connector. Designed for both Tesla and non-Tesla electric vehicles with a Type 2 charging port, this sleek, Wi-Fi enabled charger delivers up to 7kW on single-phase or 22kW on three-phase power supplies, making it an ideal charging solution for homes, apartments, workplaces and commercial properties.
With integrated Wi-Fi connectivity, the Wall Connector receives over-the-air firmware updates and allows you to schedule, manage and monitor charging directly from the Tesla app. The lightweight, weather-resistant design makes it suitable for both indoor and outdoor installation.
⚠️ Important Installation Information
The Tesla Gen 3 Wall Connector does not include PEN fault protection.
Depending on your property’s earthing arrangement, additional protection may be required to comply with current UK wiring regulations.
This may include:
- A PEN Fault Protection Device (such as the Matt:e SP-EVCP-T)
- An isolating transformer
- A TT earthing arrangement
Your installer will determine the appropriate solution for your installation.
Installing on a typical UK domestic PME supply?
Our Tesla Wall Connector + Matt:e PEN Protection Bundle provides a convenient all-in-one solution for many domestic installations.SKU: TES-WALLCONNECTOR-G3
