Hybrid Inverters
Showing 16–26 of 26 results
-
All Products, Energy Storage, Hybrid Inverters, Single Phase, SolaX Power
SolaX X1 Hybrid 7.5kW G4 Inverter
All Products, Energy Storage, Hybrid Inverters, Single Phase, SolaX PowerSolaX X1 Hybrid 7.5kW G4 Inverter
The SolaX X1 Hybrid 7.5kW G4 is the 4th generation of the SolaX Hybrid range, retaining all the key features of the 3rd generation while making some welcome improvements.
The Gen4 has been designed and developed using the very latest solar technology. SolaXย have pushed back the boundaries for what is possible when designing a storage inverter.
The ground-breaking SolaX X1 Hybrid 7.5kW G4 is an inverter that can also store surplus energy in batteries for later use. It is important to understand that this is a hybrid solar PV inverter andย battery storage controller. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter.
- In-built EPS changeover switch
- Supports up to 150% PV oversizing and 110% overload output
- Can work at full capacity down to -35C
- 97.0% Charge/discharge efficiency
- On-grid and off-grid use
- 5 work modes, 2 charging periods available
- IP65 protection level
- CT compatible, loads respond within 0.3s
- 30 Minute Total Installation Time
- Includes WiFi Dongle
SKU: X1-G4-HYBRID-7.5 -
All Products, Energy Storage, Hybrid Inverters, SolaX Power, Three Phase
SolaX X3 Hybrid 5.0kW Inverter G4 (Three Phase)
All Products, Energy Storage, Hybrid Inverters, SolaX Power, Three PhaseSolaX X3 Hybrid 5.0kW Inverter G4 (Three Phase)
The SolaX X3 Hybrid 5.0kW G4 is a DC-AC Solar Inverter that can also store surplus energy in batteries for later use. This inverter is compatible with SolaX Triple Power 3.0kWh and 5.8kWh High Voltage Batteries.
It is important to understand that this is a hybrid solar PV inverter and battery storage controller combined. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter.
- EPS (Emergency Power Supply) Capability
- Can work in parallel with up to 10x inverters
- Supports up to 150% PV oversizing and 110% overload output
- Can work at full capacity down to -35C
- 97.0% Charge/discharge efficiency
- 5 work modes, 2 charging periods available
- IP65 protection level
- 30 Minute Total Installation Time
- Includes WiFi Dongle and Three Phase CT Clamp
Connect up to 8x Triple Power Batteries
The X3 Hybrid G4 is compatible with the SolaX Triple Power 3.0kWh and 5.8kWh batteries.
When combined with the BMS Parallel Box, you can connect up toย 8x 5.8kWh batteries to a single inverter. That’s over 40kWh of storage!
Install up to 10x Inverters in Parallel
If you need to support high power loads or a have large commercial installation, the X3 Hybrid has you covered.ย You can install up to 10x inverters in parallel for up to 150kW.
Parallel Box is required for 3+ Inverters. Please contact us for more details or for help with your project.
Downloads
SolaX X3 Hybrid G4 – Datasheet
Compatibility Sheet
SolaX X3 Hybrid G4 – User Manual
SolaX X3 Hybrid G4 – Installation GuideVideo – X3 Hybrid + BMS Parallel Box
SKU: X3-G4-HYBRID-5.0 -
All Products, Energy Storage, Hybrid Inverters, SolaX Power, Three Phase
SolaX X3 Hybrid 6.0kW Inverter G4 (Three Phase)
All Products, Energy Storage, Hybrid Inverters, SolaX Power, Three PhaseSolaX X3 Hybrid 6.0kW Inverter G4 (Three Phase)
The SolaX X3 Hybrid 6.0kW G4 is a DC-AC Solar Inverter that can also store surplus energy in batteries for later use. This inverter is compatible with SolaX Triple Power 3.0kWh and 5.8kWh High Voltage Batteries.
It is important to understand that this is a hybrid solar PV inverter and battery storage controller combined. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter.
- EPS (Emergency Power Supply) Capability
- Can work in parallel with up to 10x inverters
- Supports up to 150% PV oversizing and 110% overload output
- Can work at full capacity down to -35C
- 97.0% Charge/discharge efficiency
- 5 work modes, 2 charging periods available
- IP65 protection level
- 30 Minute Total Installation Time
- Includes WiFi Dongle and Three Phase CT Clamp
Connect up to 8x Triple Power Batteries
The X3 Hybrid G4 is compatible with the SolaX Triple Power 3.0kWh and 5.8kWh batteries.
When combined with the BMS Parallel Box, you can connect up toย 8x 5.8kWh batteries to a single inverter. That’s over 40kWh of storage!
Install up to 10x Inverters in Parallel
If you need to support high power loads or a have large commercial installation, the X3 Hybrid has you covered.ย You can install up to 10x inverters in parallel for up to 150kW.
Parallel Box is required for 3+ Inverters. Please contact us for more details or for help with your project.
Downloads
SolaX X3 Hybrid G4 – Datasheet
Compatibility Sheet
SolaX X3 Hybrid G4 – User Manual
SolaX X3 Hybrid G4 – Installation GuideVideo – X3 Hybrid + BMS Parallel Box
SKU: X3-G4-HYBRID-6.0 -
All Products, Energy Storage, Hybrid Inverters, SolaX Power, Three Phase
SolaX X3 Hybrid 8.0kW Inverter G4 (Three Phase)
All Products, Energy Storage, Hybrid Inverters, SolaX Power, Three PhaseSolaX X3 Hybrid 8.0kW Inverter G4 (Three Phase)
The SolaX X3 Hybrid 8.0kW G4 is a DC-AC Solar Inverter that can also store surplus energy in batteries for later use. This inverter is compatible with SolaX Triple Power 3.0kWh and 5.8kWh High Voltage Batteries.
It is important to understand that this is a hybrid solar PV inverter and battery storage controller combined. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter.
- EPS (Emergency Power Supply) Capability
- Can work in parallel with up to 10x inverters
- Supports up to 150% PV oversizing and 110% overload output
- Can work at full capacity down to -35C
- 97.0% Charge/discharge efficiency
- 5 work modes, 2 charging periods available
- IP65 protection level
- 30 Minute Total Installation Time
- Includes WiFi Dongle and Three Phase CT Clamp
Connect up to 8x Triple Power Batteries
The X3 Hybrid G4 is compatible with the SolaX Triple Power 3.0kWh and 5.8kWh batteries.
When combined with the BMS Parallel Box, you can connect up toย 8x 5.8kWh batteries to a single inverter. That’s over 40kWh of storage!
Install up to 10x Inverters in Parallel
If you need to support high power loads or a have large commercial installation, the X3 Hybrid has you covered.ย You can install up to 10x inverters in parallel for up to 150kW.
Parallel Box is required for 3+ Inverters. Please contact us for more details or for help with your project.
Downloads
SolaX X3 Hybrid G4 – Datasheet
Compatibility Sheet
SolaX X3 Hybrid G4 – User Manual
SolaX X3 Hybrid G4 – Installation GuideVideo – X3 Hybrid + BMS Parallel Box
SKU: X3-G4-HYBRID-8.0 -
All Products, Energy Storage, Hybrid Inverters, SolaX Power, Three Phase
SolaX X3 Hybrid 10.0kW Inverter G4 (Three Phase)
All Products, Energy Storage, Hybrid Inverters, SolaX Power, Three PhaseSolaX X3 Hybrid 10.0kW Inverter G4 (Three Phase)
The SolaX X3 Hybrid 10.0kW G4 is a DC-AC Solar Inverter that can also store surplus energy in batteries for later use. This inverter is compatible with SolaX Triple Power 3.0kWh and 5.8kWh High Voltage Batteries.
It is important to understand that this is a hybrid solar PV inverter and battery storage controller combined. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter.
- EPS (Emergency Power Supply) Capability
- Can work in parallel with up to 10x inverters
- Supports up to 150% PV oversizing and 110% overload output
- Can work at full capacity down to -35C
- 97.0% Charge/discharge efficiency
- 5 work modes, 2 charging periods available
- IP65 protection level
- 30 Minute Total Installation Time
- Includes WiFi Dongle and Three Phase CT Clamp
Connect up to 8x Triple Power Batteries
The X3 Hybrid G4 is compatible with the SolaX Triple Power 3.0kWh and 5.8kWh batteries.
When combined with the BMS Parallel Box, you can connect up toย 8x 5.8kWh batteries to a single inverter. That’s over 40kWh of storage!
Install up to 10x Inverters in Parallel
If you need to support high power loads or a have large commercial installation, the X3 Hybrid has you covered.ย You can install up to 10x inverters in parallel for up to 150kW.
Parallel Box is required for 3+ Inverters. Please contact us for more details or for help with your project.
Downloads
SolaX X3 Hybrid G4 – Datasheet
Compatibility Sheet
SolaX X3 Hybrid G4 – User Manual
SolaX X3 Hybrid G4 – Installation GuideVideo – X3 Hybrid + BMS Parallel Box
SKU: X3-G4-HYBRID-10.0 -
All Products, Energy Storage, Hybrid Inverters, SolaX Power, Three Phase
SolaX X3 Hybrid 12.0kW Inverter G4 (Three Phase)
All Products, Energy Storage, Hybrid Inverters, SolaX Power, Three PhaseSolaX X3 Hybrid 12.0kW Inverter G4 (Three Phase)
The SolaX X3 Hybrid 12.0kW G4 is a DC-AC Solar Inverter that can also store surplus energy in batteries for later use. This inverter is compatible with SolaX Triple Power 3.0kWh and 5.8kWh High Voltage Batteries.
It is important to understand that this is a hybrid solar PV inverter and battery storage controller combined. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter.
- EPS (Emergency Power Supply) Capability
- Can work in parallel with up to 10x inverters
- Supports up to 150% PV oversizing and 110% overload output
- Can work at full capacity down to -35C
- 97.0% Charge/discharge efficiency
- 5 work modes, 2 charging periods available
- IP65 protection level
- 30 Minute Total Installation Time
- Includes WiFi Dongle and Three Phase CT Clamp
Connect up to 8x Triple Power Batteries
The X3 Hybrid G4 is compatible with the SolaX Triple Power 3.0kWh and 5.8kWh batteries.
When combined with the BMS Parallel Box, you can connect up toย 8x 5.8kWh batteries to a single inverter. That’s over 40kWh of storage!
Install up to 10x Inverters in Parallel
If you need to support high power loads or a have large commercial installation, the X3 Hybrid has you covered.ย You can install up to 10x inverters in parallel for up to 150kW.
Parallel Box is required for 3+ Inverters. Please contact us for more details or for help with your project.
Downloads
SolaX X3 Hybrid G4 – Datasheet
Compatibility Sheet
SolaX X3 Hybrid G4 – User Manual
SolaX X3 Hybrid G4 – Installation GuideVideo – X3 Hybrid + BMS Parallel Box
SKU: X3-G4-HYBRID-12.0 -
All Products, Energy Storage, Hybrid Inverters, SolaX Power, Three Phase
SolaX X3 Hybrid 15.0kW Inverter G4 (Three Phase)
All Products, Energy Storage, Hybrid Inverters, SolaX Power, Three PhaseSolaX X3 Hybrid 15.0kW Inverter G4 (Three Phase)
The SolaX X3 Hybrid 15.0kW G4 is a DC-AC Solar Inverter that can also store surplus energy in batteries for later use. This inverter is compatible with SolaX Triple Power 3.0kWh and 5.8kWh High Voltage Batteries.
It is important to understand that this is a hybrid solar PV inverter and battery storage controller combined. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter.
- EPS (Emergency Power Supply) Capability
- Can work in parallel with up to 10x inverters
- Supports up to 150% PV oversizing and 110% overload output
- Can work at full capacity down to -35C
- 97.0% Charge/discharge efficiency
- 5 work modes, 2 charging periods available
- IP65 protection level
- 30 Minute Total Installation Time
- Includes WiFi Dongle and Three Phase CT Clamp
Connect up to 8x Triple Power Batteries
The X3 Hybrid G4 is compatible with the SolaX Triple Power 3.0kWh and 5.8kWh batteries.
When combined with the BMS Parallel Box, you can connect up toย 8x 5.8kWh batteries to a single inverter. That’s over 40kWh of storage!
Install up to 10x Inverters in Parallel
If you need to support high power loads or a have large commercial installation, the X3 Hybrid has you covered.ย You can install up to 10x inverters in parallel for up to 150kW.
Parallel Box is required for 3+ Inverters. Please contact us for more details or for help with your project.
Downloads
SolaX X3 Hybrid G4 – Datasheet
Compatibility Sheet
SolaX X3 Hybrid G4 – User Manual
SolaX X3 Hybrid G4 – Installation GuideVideo – X3 Hybrid + BMS Parallel Box
SKU: X3-G4-HYBRID-15.0 -
All Products, Energy Storage, Hybrid Inverters, SolaX Power, Three Phase
SolaX X3 ULTRA 15.0kW Hybrid Inverter (Three Phase) – SolaX Power X3-ULT-15K
All Products, Energy Storage, Hybrid Inverters, SolaX Power, Three PhaseSolaX X3 ULTRA 15.0kW Hybrid Inverter (Three Phase) – SolaX Power X3-ULT-15K
The SolaX X3 ULTRA 15.0kW is a versatile three phase hybrid inverter that supports solar inversion and battery charging.
It is designed for 3-phase commercial solar PV installations and supports various intelligent solutions such as load management, wireless metering and dual battery terminals.
It is important to understand that this is a hybrid solar PV inverterย andย battery storage controller combined. This means when you are using in conjunction with Solar, it needs to be sized just like a regular inverter would be.
Features of the SolaX X3 ULTRA 15.0kW Hybrid Inverter:
- EPS (Emergency Power Supply) Capability
- Supports 200% PV Oversizing
- Can work in parallel with up to 10x inverters (SolaX X3 Parallel EPS Box required for 3+)
- Uses high voltage batteries
- Remote monitoring via web portal or smartphone with the SolaX Cloud
- Easy installation
- Several work modes available
- IP66 rated – suitable for outdoor installations
- 2 MPPT
- Max. 36A DC input per MPPT
- Max. DC Voltage – 1000V
- Start-up Voltage – 200V
- Dual Independent Battery Ports
- Includes WiFi Dongle
Connect over 90kWh Battery Storage to a single inverter
This inverter is compatible with any SolaX Power High Voltage battery including Triple Power 2.5kWh, 3.68kWh and 5.8kWh modules. Thanks to the unique ability to connect two battery stacks, and combined with the BMS Parallel Box, over 90kWh of storage can be achieved with a single inverter.
The inverter can be installed in parallel with up to 10x inverters and have a two full battery stacks connected to each inverter.
Have a large scale/commercial project? Please contact us for advice and pricing!
If you require any further details, please contact our team and we’ll be more than happy to help.
Product Code: X3-ULT-15K
Learn More: SolaX Power X3 ULTRADownloads
Datasheet – SolaX X3 ULTRA
User Manual – SolaX X3 ULTRA
Installation Guide – SolaX X3 ULTRAVideo – SolaX X3 ULTRA Introduction
SKU: X3-ULT-15K -
All Products, Energy Storage, Hybrid Inverters, SolaX Power, Three Phase
SolaX X3 ULTRA 20.0kW Hybrid Inverter (Three Phase) – SolaX Power X3-ULT-20K
All Products, Energy Storage, Hybrid Inverters, SolaX Power, Three PhaseSolaX X3 ULTRA 20.0kW Hybrid Inverter (Three Phase) – SolaX Power X3-ULT-20K
The SolaX X3 ULTRA 20.0kW is a versatile three phase hybrid inverter that supports solar inversion and battery charging.
It is designed for 3-phase commercial solar PV installations and supports various intelligent solutions such as load management, wireless metering and dual battery terminals.
It is important to understand that this is a hybrid solar PV inverterย andย battery storage controller combined. This means when you are using in conjunction with Solar, it needs to be sized just like a regular inverter would be.
Features of the SolaX X3 ULTRA 20.0kW Hybrid Inverter:
- EPS (Emergency Power Supply) Capability
- Supports 200% PV Oversizing
- Can work in parallel with up to 7x inverters (SolaX X3 Parallel EPS Box required for 3+)
- Uses high voltage batteries
- Remote monitoring via web portal or smartphone with the SolaX Cloud
- Easy installation
- Several work modes available
- IP66 rated – suitable for outdoor installations
- 2 MPPT
- Max. 36A DC input per MPPT
- Max. DC Voltage – 1000V
- Start-up Voltage – 200V
- Dual Independent Battery Ports
Connect over 90kWh Battery Storage to a single inverter
This inverter is compatible with any SolaX Power High Voltage battery including Triple Power 2.5kWh, 3.68kWh and 5.8kWh modules. Thanks to the unique ability to connect two battery stacks, and combined with the BMS Parallel Box, over 90kWh of storage can be achieved with a single inverter.
The inverter can be installed in parallel with up to 10x inverters and have a two full battery stacks connected to each inverter.
If you require any further details, please contact our team and we’ll be more than happy to help.
Product Code: X3-ULT-20K
Learn More: SolaX Power X3 ULTRADownloads
Datasheet – SolaX X3 ULTRA
User Manual – SolaX X3 ULTRA
Installation Guide – SolaX X3 ULTRAVideo – SolaX X3 ULTRA Introduction
SKU: X3-ULT-20K -
All Products, Energy Storage, Hybrid Inverters, SolaX Power, Three Phase
SolaX X3 ULTRA 25.0kW Hybrid Inverter (Three Phase) – SolaX Power X3-ULT-25K
All Products, Energy Storage, Hybrid Inverters, SolaX Power, Three PhaseSolaX X3 ULTRA 25.0kW Hybrid Inverter (Three Phase) – SolaX Power X3-ULT-25K
The SolaX X3 ULTRA 25.0kW is a versatile three phase hybrid inverter that supports solar inversion and battery charging.
It is designed for 3-phase commercial solar PV installations and supports various intelligent solutions such as load management, wireless metering and dual battery terminals.
It is important to understand that this is a hybrid solar PV inverterย andย battery storage controller combined. This means when you are using in conjunction with Solar, it needs to be sized just like a regular inverter would be.
Features of the SolaX X3 ULTRA 25.0kW Hybrid Inverter:
- EPS (Emergency Power Supply) Capability
- Supports 200% PV Oversizing
- Can work in parallel with up to 6x inverters (SolaX X3 Parallel EPS Box required for 3+)
- Uses high voltage batteries
- Remote monitoring via web portal or smartphone with the SolaX Cloud
- Easy installation
- Several work modes available
- IP66 rated – suitable for outdoor installations
- 3 MPPT
- Max. 36A DC input per MPPT
- Max. DC Voltage – 1000V
- Start-up Voltage – 200V
- Dual Independent Battery Ports
Connect over 90kWh Battery Storage to a single inverter
This inverter is compatible with any SolaX Power High Voltage battery including Triple Power 2.5kWh, 3.68kWh and 5.8kWh modules. Thanks to the unique ability to connect two battery stacks, and combined with the BMS Parallel Box, over 90kWh of storage can be achieved with a single inverter.
The inverter can be installed in parallel with up to 10x inverters and have a two full battery stacks connected to each inverter.
If you require any further details, please contact our team and we’ll be more than happy to help.
Product Code: X3-ULT-25K
Learn More: SolaX Power X3 ULTRADownloads
Datasheet – SolaX X3 ULTRA
User Manual – SolaX X3 ULTRA
Installation Guide – SolaX X3 ULTRAVideo – SolaX X3 ULTRA Introduction
SKU: X3-ULT-25K -
All Products, Energy Storage, Hybrid Inverters, SolaX Power, Three Phase
SolaX X3 ULTRA 30.0kW Hybrid Inverter (Three Phase) – SolaX Power X3-ULT-30K
All Products, Energy Storage, Hybrid Inverters, SolaX Power, Three PhaseSolaX X3 ULTRA 30.0kW Hybrid Inverter (Three Phase) – SolaX Power X3-ULT-30K
The SolaX X3 ULTRA 30.0kW is a versatile three phase hybrid inverter that supports solar inversion and battery charging.
It is designed for 3-phase commercial solar PV installations and supports various intelligent solutions such as load management, wireless metering and dual battery terminals.
It is important to understand that this is a hybrid solar PV inverterย andย battery storage controller combined. This means when you are using in conjunction with Solar, it needs to be sized just like a regular inverter would be.
Features of the SolaX X3 ULTRA 30.0kW Hybrid Inverter:
- EPS (Emergency Power Supply) Capability
- Supports 200% PV Oversizing
- Can work in parallel with up to 5x inverters (SolaX X3 Parallel EPS Box required for 3+)
- Uses high voltage batteries
- Remote monitoring via web portal or smartphone with the SolaX Cloud
- Easy installation
- Several work modes available
- IP66 rated – suitable for outdoor installations
- 3 MPPT
- Max. 36A DC input per MPPT
- Max. DC Voltage – 1000V
- Start-up Voltage – 200V
- Dual Independent Battery Ports
Connect over 90kWh Battery Storage to a single inverter
This inverter is compatible with any SolaX Power High Voltage battery including Triple Power 2.5kWh, 3.68kWh and 5.8kWh modules. Thanks to the unique ability to connect two battery stacks, and combined with the BMS Parallel Box, over 90kWh of storage can be achieved with a single inverter.
The inverter can be installed in parallel with up to 10x inverters and have a two full battery stacks connected to each inverter.
If you require any further details, please contact our team and we’ll be more than happy to help.
Product Code: X3-ULT-30K
Learn More: SolaX Power X3 ULTRADownloads
Datasheet – SolaX X3 ULTRA
User Manual – SolaX X3 ULTRA
Installation Guide – SolaX X3 ULTRAVideo – SolaX X3 ULTRA Introduction
SKU: X3-ULT-30K
