SolaX BMU for TP-HS25/36 Batteries (BMU) – TBMS-MCS0800
1 in stock
This is the BMU for the new SolaX T-BAT-SYS-HV-S2.5/3.6 battery offering from SolaX Power.
This BMU (Battery Management Unit) is for use with the TP-HS25 and TP-HS36 Battery Modules from SolaX Power.
This product is for the BMU and Base ONLY – batteries are not included and must be purchased separately. Both the TP-HS25 and TP-HS36 battery modules are compatible.
Battery Limits (Important)
- Minimum Battery Requirements
- Single Phase: 2x TP-HS Batteries
- Three Phase: 4x TP-HS Batteries
- Maximum Battery Limit
- Single Phase: 8x TP-HS Batteries
- Three Phase: 13x TP-HS Batteries
- X3-ULTRA: 26x TP-HS Batteries
These batteries are stackable for installation, but please note the maximum quantity is 9 units for one stack and there is a maximum of 2 stacks per inverter. Series box is required for second stack.
Included in kit:
- 1x SolaX TP-HS BMU (TBMS-MCS0800)
- Battery Kit / Base
This BMU is for use with either the TP-HS25 or TP-HS36 battery modules. Batteries sold separately, please contact us for guidance if needed.
Features of the SolaX BMU for TP-HS25/36 Batteries:
- Scalable to 47+kWh Storage Capacity
- Easy Installation – Stackable battery modules & pre-wired cables
- Unique Heating Technology for enhanced performance in lower temperature
- IP65 Protection Level
- Soft Start Protection
- Remote fault diagnosis, upgrade and maintenance
- Compact Design
- 10-year Warranty
- Dimensions (LxWxH) – 510 x 365 x 157mm
- Weight – 10kg
Product Code: TBMS-MCS0800
Learn More: SolaX Triple Power TP-HS25/36
Downloads
Installation Guide – SolaX TP-HS25/36
User Manual – SolaX TP-HS25/36
Video – SolaX TP-HS25 & TP-HS36 Installation Guide
£442.80 £492.00 inc.VAT (£369.00 Ex.VAT)
1 in stock
This is the BMU for the new SolaX T-BAT-SYS-HV-S2.5/3.6 battery offering from SolaX Power.
This is the BMU for use with the TP-HS25 and TP-HS36 Battery Modules from SolaX Power.
This product is for the BMU and Base ONLY – batteries are not included and must be purchased separately. Both the TP-HS25 and TP-HS36 battery modules are compatible.
Battery Limits (Important)
- Minimum Battery Requirements
- Single Phase: 2x TP-HS Batteries
- Three Phase: 4x TP-HS Batteries
- Maximum Battery Limit
- Single Phase: 8x TP-HS Batteries
- Three Phase: 13x TP-HS Batteries
- X3-ULTRA: 26x TP-HS Batteries
These batteries are stackable for installation, but please note the maximum quantity is 9 units for one stack and there is a maximum of 2 stacks per inverter. Series box is required for second stack.
Included in kit:
- 1x SolaX TP-HS BMU (TBMS-MCS0800)
- Battery Kit / Base
This BMU is for use with either the TP-HS25 or TP-HS36 battery modules. Batteries sold separately, please contact us for guidance if needed.
Features of the SolaX BMU for TP-HS25/36 Batteries:
- Scalable to 47+kWh Storage Capacity
- Easy Installation – Stackable battery modules & pre-wired cables
- Unique Heating Technology for enhanced performance in lower temperature
- IP65 Protection Level
- Soft Start Protection
- Remote fault diagnosis, upgrade and maintenance
- Compact Design
- 10-year Warranty
- Dimensions (LxWxH) – 510 x 365 x 157mm
- Weight – 10kg
Easy Installation
The TP-HS25/36 batteries are stackable modules designed for fast and easy single person installation. Easy and fast for single person installation. The batteries come with pre-wired communication cables for plug and play installation.
Battery Heating Technology and IP65 Rating
These SolaX batteries have a unique battery heating technology built-in, enabling a wider operating temperature range and improving performance even in low temperatures. Combined with the IP65 rating, these batteries are ideal for outdoor installation.
Product Code: TBMS-MCS0800
Learn More: SolaX Triple Power TP-HS25/36
Downloads
Installation Guide – SolaX TP-HS25/36
User Manual – SolaX TP-HS25/36
Video – SolaX TP-HS25 & TP-HS36 Installation Guide
| Weight | 10 kg |
|---|---|
| Dimensions | 51 × 36.5 × 15.7 cm |
| Brand | SolaX Power |
| Protection Class | IP65 |
| Dimensions | 510 x 365 x 152 (mm) (Battery), 510 x 365 x 157 (mm) |
| Weight | 10kg (BMU) |
| Warranty | 10 Years |
Downloads
Datasheet – Triple Power T-BAT-SYS-HV-S3.6
Installation Guide – Triple Power T-BAT-SYS-HV-S3.6
User Manual – Triple Power T-BAT-SYS-HV-S3.6
Video – SolaX HS25 & HS36 Installation Guide
Related products
-
All Products, Batteries, Energy Storage, SolaX Power
SolaX Triple Power 5.8kWh SLAVE Battery (V2) – SolaX T58 Slave Battery
All Products, Batteries, Energy Storage, SolaX PowerSolaX Triple Power 5.8kWh SLAVE Battery (V2) – SolaX T58 Slave Battery
The market leading high-voltage SolaX Triple Power 5.8kWh SLAVE battery from SolaX/Triple Power is compatible with the full range of SolaX High Voltage hybrid inverters and AC chargers.
This product is the Triple Power 5.8kWh SLAVE battery which is used to add storage to a system using a TP58 Master Battery or for use with a SolaX BMS Parallel Box.
Battery Limits (Important)
- Minimum Battery Requirements
- 1x TP58 Master Battery
- Maximum Battery Limit
- Single Phase: 1x TP58 Master Battery + 2x TP58 Slave Batteries
- Three Phase: 1x TP58 Master Battery + 3x TP58 Slave Batteries
Need more storage? The SolaX BMS Parallel Box enables expansion up to 6 batteries (single phase) or 8 batteries (three phase). Contact us for more details!
Included in kit:
- 1x SolaX Triple Power 5.8kWh SLAVE Battery (TP58 Slave)
New system? Check out the TP58 Master battery which includes the BMS. Click here!
Features of the SolaX Triple Power 5.8kWh SLAVE Battery:
- Scalable to 46.4kWh Storage Capacity (with BMS Parallel Box)
- Floor and Wall Mountable Batteries
- High Voltage means thinner cables are required = higher efficiency
- IP65 Protection Level
- 90% Depth of Discharge (DoD)
- Max Charge/Discharge Current: 35A
- Safest LiFeP04 Battery Chemistry
- Upwards of 6000 life cycles
- Easy installation – plug and play with all cables supplied
- 10-year Warranty
- Dimensions (WxHxD) – 474 x 647 x 193 mm
- Weight – 68.5kg
Product Code: TP58 Slave
Learn More: SolaX Triple Power 5.8kWhDownloads
Datasheet – SolaX Triple Power 5.8kWh
Installation Guide – SolaX Triple Power 5.8kWh
User Manual – SolaX Triple Power 5.8kWhSKU: HV11550-58-SLAVE - Minimum Battery Requirements
-
All Products, Growatt Single MPPT, Solar Inverters
Growatt MIC 2500TL-X Solar Inverter (1 MPPT) (DC)
Specifications:
- MPPT tracking accuracy of 99%
- Max. Efficiency 97.6%
- Transformer-less design, offers lighter and more convenient installation
- Power factor continuously adjustable
- Flexible interface
- Touch key & OLED display
- IP65
- Compact design
- Warranty: 10 years (option to extend to either 15 years or 20 years.)
- Startup Voltage: 50V
This version has a built-in DC Isolation Switch.
Growatt now have over 1.5GW worth of inverters installed worldwide and were the first inverter manufacturer to be awarded A+ rating by Photon. They also boast the highest ever inverter efficiency ever achieved (99.06% with the 20000HE model) and are constantly striving to reach higher efficiencies across their product range.
WiFi Monitoring:
For monitoring you can add a ShineWiFi. Please note, the Growatt Installer Code Policy is being introduced in the UK and Ireland. It means all installers will need to register an ‘Installer Code’ for using the Growatt monitoring platform. This installer code can be provided to the end user by the installer to allow for the viewing of your devices from your installer-level monitoring account. For more information, please refer to the following document: Growatt Installer Code policy
Note to end users:
Can end-users purchase this product to save money on the cost of a replacement inverter? Yes, of course! Simply purchase the inverter and arrange for a local qualified electrician to install the unit for you (should be a 1-2 hour call-out). By sourcing the inverter yourself, you can make a huge saving on the prices quoted by installation companies for supply and fit services.
SKU: GROWATT-2500-TL-X -
All Products, iBoost, Immersion Controllers, Installation Accessories, Marlec, System Monitoring
Solar iBoost+ Buddy Monitor V2 – for Solar iBoost+ Plus
All Products, iBoost, Immersion Controllers, Installation Accessories, Marlec, System MonitoringSolar iBoost+ Buddy Monitor V2 – for Solar iBoost+ Plus
An optional extra for your Marlec Solar iBoost+ Plus, the iBoost+ Buddy Version 2. This device works as an optional extra for your iBoost. This will remotely monitor the Solar iBoost+ and let you know when it is heating your hot water and when there is spare power
Downloads
SKU: solariboostbuddy -
AC Chargers, All Products, Energy Storage, SolaX Power
SolaX Power X1-FIT 3.7kW G4 Retrofit AC Charger – SolaX X1 FIT
AC Chargers, All Products, Energy Storage, SolaX PowerSolaX Power X1-FIT 3.7kW G4 Retrofit AC Charger – SolaX X1 FIT
The SolaX Power X1-FIT 3.7kw Gen4 AC Charger is the latest in the Single Phase X1 Retrofit AC Charger range.
Generate energy from your solar panels during the day, once the background load is satisfied, the intelligent SolaX Power X1-FIT 3.7kw Charger will direct excess energy into your battery for later use, enabling you to make the most use of your generated energy.
Charge your batteries with free, clean solar energy. Discharge your stored energy during the evening when the sun has gone down, then charge your batteries back up over night on a cheaper tariff such as Octopus GO.
If your home experiences a loss of power, the X1 Retro Fit will then send the stored power back to the home, ensuring you are never left in the dark even during a power-cut. Compatible with every inverter manufacturer, the X1 Retro Fit charger is the perfect upgrade to your system when paired with SolaX Triple Power Batteries.
Key Features:
- Maximum efficiency up to 97%
- Online Monitoring
- Remote Upgrade and Control
- Plug & Play Installation
- Add to existing PV System
- VPP Function
- Working Temp -40°C to 65°C
- IP65 Protection Level
SKU: X1-FIT-3.7-W
